Cooper Lighting SC1000R instruction manual Assembling your fixture

SC1000R I.S 325-1439 6/4/04 4:12 PM Page 4

ENGLISH

other connection voids the warranty.

•The electrical system, and the method of electrically connecting the fixture to it, must be in accordance with the National Electric Code and local building codes.

•Do not use this apparatus near water.

•WARNING: Risk of electric shock. Do not use with extension cord near water or where water may accumulate. Keep lamp at least 16 feet from pools and spas. Keep plugs and receptacles dry. For use only on GFCI protected circuits.

•Disassembly of the fixture will void the warranty.

•If lens is replaced, use only tempered safety glass of equal thick- ness.

•For maximum bulb life, position light so that the halogen bulb remains within 4° of horizontal.

•For dry location use.

•Clean only with dry cloth.

•Do not install near any heat sources such as radiators, heat regis- ters, stoves, or other apparatus (including amplifiers) that produce heat.

•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other does. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

•Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

•Only use attachments/accessories specified by the manufacturer.

•Unplug this apparatus during lightning storms or when unused for long periods of time.

•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

SAVE THESE INSTRUCTIONS

NOTE: Deviation from the assembly instructions may result in a risk of fire or electric shock.

Assembling your fixture

Step 1: Carefully remove the cage from box and place on floor in an upright position. The bottom of the cage contains the legs and hinge assem- bly for the doors.

Step 2: Release the light fixture from the cage door by carefully unlatching

4