Door Latch Assembly Installation Instructions
E. Insert slotted holes into new latch.
F.Attach bracket and latch to cabinet frame using (2)
FIGURE 14
G.Close door and adjust cabinet bracket using the
FIGURE 16
5. Connect cabinet interrupt switch jumper wire.
A.Plug one end of black spade end jumper in each end of existing cable.
FIGURE 18
Publication Number: 729011146INS | - 4 - |
FIGURE 15
H.Check lower and upper door to assure seal. If not adjust bracket until it properly seals.
FIGURE 17
B.Wrap a piece of electrical tape on both ends to prevent wires from coming loose.
FIGURE 19
© 2004, IMI Cornelius Inc.
