Door Latch Assembly Installation Instructions
C. Remove cover from box.
D.Locate the 2 pin plug that says “SOLD OUT” on the control board. There will be one for each pump. Disconnect these connectors. There will be (4) total in a four flavor machine.
FIGURE 26
FIGURE 27
E. Replace the connectors with the “SOLD OUT” jumpers.
FIGURE 28
THIS COMPLETES THE LATCH ASSEMBLY PROCEDURE for OPTION 2 “SOLD OUT DISABLED OPTION” disabling the sold out function. Complete the procedure by replacing all machine covers and guards.
If machine does not function after reassembly make sure control box is properly seated in mating con- nector.
Publication Number: 729011146INS | - 6 - | © 2004, IMI Cornelius Inc. |