Jet Spray (Cold) Training Manual

TROUBLESHOOTING

1.NO SPRAY

1.1 Pump assembly

Be sure the spray switch is ON

Check impella magnet. Impella should spin freely. If it does not, remove and clean both impella and support pin.

NOTE: Check that the Impella assembly is in upright position, fins facing upward.

Sugar and solids can crystallize and cause impella to bind. Do not allow these materials to dry on parts.

Bearing in impella could be worn causing impella to scrap the base of the bowl. Replace the impella assembly.

NOTE: Switch must be OFF when inserting the impella into the bowl to insure magnetic coupling.

Long pieces of pulp may plug impella and bind the impella blades. Juices with excessive pulp must be strained in order to spray. If it is desired to retain pulp, use the Jet-Spray Circulator #S6737 in place of the pump.

With the JS/JT/JWT series, assure that the pump housing is locked into place. If either of the tabs located on the bottom perimeter of the pump housing assembly are broken, the pump will not spray properly. With the TJ/EJ/J15 series, the pump cover should be locked under all three bowl lugs. If any of these are broken the pump will not spray properly and will vibrate and be noisy. Replace the bowl assembly or use the Jet-Spray Circulator #S6737.

1.2 Spray Drive Motor

To check the spray power source, remove front splash panel or side panels, depending on the model, by removing the screws. This will expose the spray drive assembly. The drive assembly must spin freely. If shaft or magnet rubs or binds, adjust or replace it.

The spray drive motor must run in a counterclockwise direction.

If the motor is stopped or not up to speed it will affect circulation and temperature of the drink. Replace spray switch or spray drive motor.

- 12 -

© 2000, IMI Cornelius Inc.

SYSTEM DETAILS

Page 15 Page 17
Page 16
Image 16
Cornelius JS7, JT20, J15, EJ1, JT30 manual Troubleshooting, Pump assembly, Spray Drive Motor, No Spray
Page 15 Page 17

JT30, EJ1, J15, JS7, JT20 specifications

Cornelius has long been a leader in the beverage dispensing industry, with a range of innovative products including the JT20, JS7, J15, EJ1, and JT30 models. Each of these dispensers showcases unique features, advanced technologies, and characteristics that cater to diverse commercial needs.

The Cornelius JT20 is known for its versatility and efficiency. Designed for high-volume applications, this unit offers a 20-flavor capability, making it an excellent choice for restaurants and convenience stores. With advanced cooling technology, the JT20 ensures optimal beverage temperature while minimizing energy consumption. Its user-friendly interface allows for easy calibration and operation, which is crucial during busy service hours.

Next is the JS7, which appeals to those who prioritize simplicity and reliability. This model boasts a compact design, ideal for limited spaces while delivering a robust performance. The JS7 comes equipped with high-quality carbonators that enhance drink taste and consistency. Its straightforward maintenance features ensure that operators can keep it running smoothly without excessive downtime.

The J15 model stands out for its innovative integration of digital technology. Equipped with a smart dispensing system, the J15 allows users to customize drinks according to customer preferences with precise measurements. This model's intuitive touchscreen interface enhances user experience while providing essential analytics for operators to optimize beverage offerings.

In contrast, the EJ1 emphasizes eco-friendliness. This model is crafted with sustainable materials and incorporates advanced energy-saving features, making it suitable for environmentally conscious businesses. The EJ1 also supports a variety of drink options, including non-carbonated beverages, further adding to its versatility.

Lastly, the JT30 takes performance to a new level with its impressive output and flexibility to serve a wide range of beverages. It features a specialized cooling system designed for rapid beverage service without sacrificing quality, making it ideal for high-traffic locations. The JT30’s modular design allows for easy customization, ensuring it can be tailored to meet specific business needs.

In summary, the Cornelius JT20, JS7, J15, EJ1, and JT30 each bring unique advantages to the table, combining modern technology, efficiency, and adaptability to the beverage dispensing market. With a commitment to innovation, Cornelius continues to set the standard in the industry, ensuring that operators can deliver exceptional beverage experiences to their customers.
Top Page Image Contents