Troubleshooting
If there is no sound from any of the speakers:
•Make sure the subwoofer is plugged into an active AC wall outlet.
•Make sure the Master Power Switch, located on the rear of the subwoofer, is in the On/Standby position.
•Make sure there is a source – for example, a DVD Player, CD Player, VCR or television – hooked up to one of the four input jacks.
•Make sure that the program material is playing.
•Recheck the hookup connections, referring to the Speaker Connections section.
If there is no sound from the center speaker:
•Make sure that the processor is in the
•Increase the level of the center channel, using the
•Check the connections between the subwoofer and the center speaker.
If you have low bass output:
•Experiment with placement of the subwoofer. Remember, place the subwoofer in a
corner to get maximum bass output from the system.
•Increase the subwoofer level, using the level- adjustment instructions found earlier in this manual.
•Increase the level of bass, using the remote control.
The internal software version may be checked by pressing the ON Button on the remote when the unit is already switched ON. The software version number appears as a small "v", followed by a sequence of digits.
Optional Floor Stands are available from your JBL Dealer (Order code: CSSTANDS).
14
