6 Surround Mode (Remote and Front Panel) Press the SURR Button on the Front Panel repeatedly to scroll through the various Surround and Stereo options. The SURR UP/DOWN Button on the Remote Control lets you scroll either up or down through the same modes.
7 Bass (Remote Only)
Press this Button to select Bass Enhancement in certain Surround Modes. If no options are available for a certain Surround Mode, the Display shows N/A (Not Applicable).
8 Transport Control Buttons (Remote Only).
Use these six buttons to control Start, Stop, Pause, Search and Skip on compatible DVD players.
9 Light Button (Remote Only)
Press this Button to activate the background light in the Remote Buttons for easy operation in a dark room. The light stays on for some seconds, then switches off.
A Alphanumeric Buttons (Remote Only) Can be used to enter digits when naming Inputs.
B Tone (Remote Only)
Press the Tone Button to activate and switch between Bass and Treble. When the word BASS or TREBLE appears in the Information Display, press the UP or DOWN Buttons F to increase or decrease the Bass or Treble level. The amount of adjustment is shown in the Display with digits from +15 to
C Volume (Remote and Front Panel)
Press (∧) on the remote control or the front panel to raise the system’s volume. Press (∨) on the remote control or the front panel to lower the system’s volume. The volume setting is indicated with digits from 0 to 99 in the Infor- mation Display.
D Mute Button (Remote and Front Panel)
Press this Button to completely silence the system. The word MUTE blinks in the display. Press the Mute Button again to end the function.
Note: The mute function can also be turned off by press- ing either of the volume buttons on the front panel or the remote control.
E Exit Button (Remote Only)
Press the Exit Button to stop a process and leave menus or functions.
F Navigation Buttons (Remote Only)
Use these four Buttons to navigate through the menus.
G AUX Button (Remote Only)
Press the AUX Button to listen to a music player connect- ed to the Front Panel AUX IN 3,5mm stereo jack I.
H Input (Front Panel Only)
This control is available on the front panel. It allows manual selection when the user repeatedly presses and releases the button for any of the Xcite’s five inputs. The Xcite features an Automatic Input Selection feature that automatically switches the Xcite to the source connected to one of its two digital inputs as soon as that device is powered on. Please read the section on page 3 to thor- oughly familiarize yourself with the conveniences and conditions of using the Automatic Input Selection feature.
I AUX IN (Front Panel Only)
This 3,5mm stereo jack permits easy connection of such units as an MP3 Player, portable CD Player or the sound output from a video camera. Select AUX with Button G on the Remote Control, or by scrolling through the Inputs until you get to AUX with Button H (INPUT) on the Front Panel.
J Information Display (Front Panel Only)
This Display window shows all information regarding oper- ation and status for the system. When entering a com- mand, the information first scrolls across the lower part of the Display, making even longer texts legible. After the scrolling text, a fixed text that may be abbreviated appears. Also, the Display shows a number of standard informative words or logos according to your selections.
K Infrared Sensor Window
(On Front Panel and Center Speaker)
This Sensor receives all commands from the Remote Con- trol and should not be covered. In case you prefer to place the Subwoofer in a hidden position, the Remote Sensor Extension may be used instead. Please refer to separate explanation of this sensor.
10
