Continuous Flow Icemaker Service Manual

WATER LEVEL CONTROL

HOW WATER LEVEL CONTROL WORKS

When water is introduced through the inlet fitting the float rises, the float pushes against a lever that in turn, forces the poppet assembly against the inlet fitting valve seat that seals the water off. See Figure 1 (page 7). Before the water inlet is sealed, the safety switch is operated. In the event of a water failure the float would drop down and operate the safety switch to shut off the machine.

If water level control will not shut off and seal at level as indicated, be sure inlet pressure does not exceed recommended factory operating range.

Under ordinary circumstances adjustment should not be necessary providing it was properly adjusted when unit was installed or relocated. If however, the control becomes inoperative, repair or replace. See Start-up Adjustment in the installation manual.

PURPOSE OF WATER LEVEL CONTROL

1.To automatically maintain proper water level in the evaporator when the unit is running and making ice.

2.A safety switch is operated in the event of an interruption in water supply. The switch shuts off the electrical power to the icemaker and its refrigeration system. Switch will reset as soon as cause of water failure has been corrected and proper water level in icemaker has again been reached.

3.The transparent bowl not only provides a visible check of water level, but also is a good guide to the internal conditions which exist within the icemaker assembly itself. (See cleaning procedure.)

TO REPLACE WATER LEVEL CONTROL

1.Shut off the water supply. Shut off the main power switch or unplug the ice dispenser from electrical outlet.

2.Remove the flexible tubing from bottom of water level control and drain water from water level control and evaporator.

3.Remove flexible tubing at bottom of water level bowl connected to the overflow.

4.Hold water inlet fitting with proper tool to prevent it from rotating when disconnecting the water inlet.

5.Remove wing nut holding water control to its mounting bracket. Control can be removed by lifting straight up.

TO REPLACE WATER LEVEL SAFETY SWITCH

1.Shut off main power switch or unplug the ice dispenser from electrical outlet.

2.Unplug Molex connector connecting switch to electrical box.

3.Remove the 2 screws anchoring the water level safety switch to the bottom of the water level control mounting bracket.

© 2006, IMI Cornelius Inc.

- 9 -

Publication Number: 630460324SER

Page 12 Page 14
Page 13
Image 13
Cornelius WCF1411-A HOW Water Level Control Works, Purpose of Water Level Control, To Replace Water Level Control
Page 12 Page 14

WCF1411-A specifications

The Cornelius WCF1411-A is a high-performance beverage dispensing system designed to meet the demands of both commercial and light industrial applications. This innovative unit serves as an ideal solution for businesses looking to provide a variety of cold beverages efficiently and effectively.

One of the standout features of the WCF1411-A is its capacity to dispense multiple beverages from a single unit. With the ability to host numerous flavor options, this system caters to diverse consumer preferences. Operators can select from a range of beverages, including soft drinks, flavored waters, and even iced coffees, making it a versatile addition to any beverage service setup. This capability not only enhances customer satisfaction but also streamlines inventory management.

The WCF1411-A utilizes advanced cooling technology, ensuring that drinks are consistently chilled to the perfect serving temperature. This is achieved through its efficient refrigeration system, which minimizes energy consumption while maintaining optimal performance. The dual-cooled setup provides precise temperature control, ensuring that each beverage is served refreshing, enhancing the overall quality and flavor.

Moreover, the Cornelius WCF1411-A is designed with user-friendly features. The intuitive interface simplifies the dispensing process, allowing staff to quickly serve beverages with minimal training. Additionally, the unit is equipped with a durable stainless steel construction, which not only increases its longevity but also makes it easy to clean and maintain. This durability is particularly useful in high-traffic environments, where the system is subjected to regular use.

Another notable characteristic of the WCF1411-A is its compact design. This makes it suitable for spaces with limited room, such as small restaurants, cafes, and convenience stores. Despite its smaller footprint, the system does not compromise on performance, delivering similar capabilities to larger units.

Furthermore, the WCF1411-A is compatible with various beverage mixers, allowing operators to expand their offerings with ease. Its flexible connectivity options enable integration with existing systems, providing seamless operation within various environments.

In conclusion, the Cornelius WCF1411-A stands out as a reliable and efficient beverage dispensing solution. With its multi-beverage capability, advanced cooling technology, user-friendly features, durable construction, and compact design, it addresses the needs of modern beverage service operators, ensuring delightful drink experiences for customers while maximizing operational efficiency.
Top Page Image Contents