15 36

nHS Settings
SettingAlarm
1.Press the softkey.Menu
Youare able to set the alarm on the handset
andadjust the alarm settings.
2. Press or key to choose ,
thenpress the .
3. Press the soft key to choose
menu.
4.The display shows the current set. Use the
or keyto select / ,press the
softkey.
5. If youselect ,the display indicates you
to enter the time in : format. Use
thenumeric keypad to enter.
H
Select Alarm
On Off
Select
On
HH MM
S Settings
Selectsoft key
6.Press the softkey,a beep sounds and
thedisplay shows youcan
press or key to enable or disable the
snoozefunction on the alarm and press the
softkey.
Next
SnoozeOn/Off,
Save
7. When the alarm sounds, press any key to
stopthe ring.
Notes
Snooze On
SnoozeOff
:
Atstep 5 you need to enter the time in 24-
Hourformat.
If you press any key at the right time the
alarmto ring, the alarm will be silent.
If you choose ,the alarm will
ring at regular intervals of 11 minutes. If
you press the key when the alarm
sounds, the option will be switched to
.
When the handset is in power off mode and you
place it on the base, it automatically turns on. To
turn the handset on or off in standby mode,
followthese steps:
1. , press and hold the
key until the display is switched on. While the
handset searches for a base, the signal icon
will flash and the following message will be
displayed.
Toturn the handset on
When the handset has found the base, it will
enter the standby mode, the display will show
handset number and the handset name (if you
haveone saved as described on page 23), signal
icon, battery icon and current time. If the
handset is unsuccessful in finding a base, the
handset will behave according to the Out of
Rangecondition.
nTurning Handset On/Off
2. , keep the key
presseduntil the display is switched off.
To turn off the handset
Note
YOU SHOULD
FULLY CHARGE THE HANDSET BEFORE
USING.
:
If the battery power is very low when you
place the handset on the base, the following
message will be displayed.

Searching...

Charging...