Adding the Phone book Entries
1.Press the Menu soft key.
2.Press the 
key to choose Phonebook, press the Select soft key.
3.Press the Select soft key to choose New.
4.The display shows "Name ?". Enter the name you want to use, then press the Next soft key to confirm. The display shows "Number ?". Enter the desired number (up to 20 digits), press the Next soft key.
5.*Use 
or 
key to select the ring you like to associate with the number, press the Save soft key to confirm.
6. Repeat if necessary.
*If you want to set a VIP number, you should select a special ring tone for it. The ring tone should be different from the external ring you have set. You can set up to 9 VIP ring tones associate with 9 VIP numbers/groups.
Note:
If you make a mistake while entering a number, use the Erase soft key to correct it. Each time you press the key, the last digit is deleted.
Using a Pause
A pause is useful when you access an interactive voice response system, such as an automated banking system. A pause provides a delay of 3 seconds. If you want to insert a pause when you dial a number in standby mode or store a number
in memory, press the 
key. The letter P will appear at the pause entry.
Viewing the Phone book Entries
1.In the standby mode, press the 
key.
2.Press 
or 
key repeatedly until the desired entry is displayed.
32
