| SETTING UP YOUR UNIT |
FACTORYPRESETS |
|
To ensure your telephone works properly, you must set the following options correctly | |
before using your phone. To begin the setting sequence, press OPTIONS button. | |
The following table shows you the factory default settings for your unit: | |
Display | Setting |
Language | English |
Area Code | 4 Area Codes, No Setting |
Flash | 600 ms |
Line 1 / Line 2 | Line 1 |
Tone / Pulse | Tone Dialing |
After the adapter is connected, the display will show as indicated below for setting. |
1.[SET LANGUAGE] appears on the display. “1. ENG” and “2. ESP” will flash for you to choose to view your message in English or Spanish. This will only flash for a short time before going into standby mode.
(1)Press 1 to select ENG (English), or press 2 to select ESP (Spanish). A check mark moves to the selection you have made.
(2)Press DOWN button to confirm the selection, and the screen will display the next setting option.
2.This telephone has been specially designed to allow programming of up to four different area codes.
(1)When [SET AREA CODE] appears, use the keypad
(2)Use the same procedure as in step 1 to program the 2ND, 3RD and 4TH area codes.
(3)The DOWN button can be used as a skip feature. For example, if there are only two area codes to be programmed, when “ENTER 3RD CODE”
and “ENTER 4TH CODE” appear, press the DOWN button to confirm, and the screen will display the next setting option.
7