3. When [FLASH TIMER (MS)] appears, press EDIT button to set the desired Flash Timer.
(1) Use LEFT button to decrease the timer by 50 ms. (Min. 100 ms)
(2) Use RIGHT button to increase the timer by 50 ms. (Max. 1000 ms)
(3) Press DOWN button to confirm, and the screen will display the next setting option.
4. When [SELECT LINE1/2? ] appears, “1. LINE 1”and “2. LINE 2” will flash and you may select line 1 or 2 as the prime line.
(1)The default setting for prime line is Line1. The prime line is the automatically selected when the handset is lifted, or handsfree is pressed.
(2)Press 1 button to select LINE 1, or Press 2 button to select LINE 2. The check mark moves to the selection you have made.
(3) Press DOWN button to confirm, and the screen will display the next setting option.
5. When [DIAL MODE ] appears, 1. P (Pulse) and 2. T (Tone) will flash and you may select Tone or Pulse Dialing.
(1) Press 1 button to select TONE, or Press 2 button to select PULSE. The check mark moves to the selection you have made.
(2) Press DOWN button to confirm, and the screen will display the next setting option, or press OPTION button to skip the programming.
Note: In order for the Caller ID callback to work (see Using the Caller ID Function), you must set the PULSE/TONE switch to the Tone position.
8
