Country Home Products C123E-CHP Section Ii - Assembly Instructions, Package Contents

SECTION II - ASSEMBLY INSTRUCTIONS

PACKAGE CONTENTS

SKID	PARTS BOX	BOLT BAG
CHIPPER	CHIPPER HOPPER	4 EA – 5/16-18 X ¾” CARRIAGE BOLTS
TOW BEAM	HITCH PLATE	3 EA – 5/16-18 X 1” HHCS
PARTS BOX	GLASSES	7 EA – 5/16-18 NYLOCK NUTS
	OWNER’S MANUAL	4 EA – 5/16 USS FLATWASHERS
	ENGINE MANUAL	1 EA – ¼-20 X 1 1/4” U-BOLT
	BOLT BAG	2 EA – ¼-20 NYLOCK NUTS
	KNIFE GAUGE	2 EA – ENGINE KEY

TOOLS REQUIRED FOR ASSEMBLY

•1/2” Wrench or Socket - 2 required

STEP I - UNPACKING AND CHECKING CONTENTS

1.Remove the carton and place the unit on its wheels.

2.After unpacking the shipping carton, compare the contents with the list above.

3.If any parts are missing or damaged, contact Country Home Products at 800-376-9637.

4.Assembly should be done on a clean, level surface.

STEP II - UNIT ASSEMBLY INSTRUCTIONS

1.Assemble chipper hopper (item #20, pg 30) to machine using four each 5/16”-18 x 3/4” carriage bolts, 5/16”-18 nylock nuts and 5/16” flatwashers from the bolt bag. Put head of bolt inside hopper with threads sticking out. Tighten all hardware with a ½” wrench.

2.Attach the tow beam (item #2, pg 28) to the axle of the machine by putting the u-bolt (item #26, pg 28) from the bolt bag around the axle and through the two holes in the tow beam per the picture on page 29. Secure with two ¼-20 nylock nuts.

3.Attach the center of the tow beam to the front of the frame as shown on page 29 with a 5/16-18 x 1” HHCS and a 5/16-18 nylock nut.

4.Attach the hitch plate (item # 3, pg 28) to the tow beam as shown on page 29 with two 5/16-18 x 1” HHCS (item #18, pg 28) and two 5/16-18 nylock nuts (item #19, pg 28).

5.Service the engine as per the engine manual.

6.Lubricate both rotor bearings every 8 hours of operation with multi-purpose grease. Also check the bearing collar set screws regularly to be sure they are tight. If they are loose, reset them with Loctite 243, obtainable at any hardware store.

10