![* VOC Surrogate Claims](/images/new-backgrounds/63429/6342955x1.webp)
* VOC Surrogate Claims
|
| Chemical |
| Drinking water regulatory | Influent challenge | Chemical reduction | Maximum product water |
|
|
| level1 (MCL/MAC) mg/L | concentration2 mg/L | percent | concentration mg/L | |
|
| alachlor |
| 0.002 | 0.050 | > 98 | 0.0013 |
|
| atrazine |
| 0.003 | 0.100 | > 97 | 0.0033 |
|
| benzene |
| 0.005 | 0.081 | > 99 | 0.0013 |
|
| carbofuran |
| 0.04 | 0.190 | > 99 | 0.0013 |
|
| carbon tetrachloride |
| 0.005 | 0.078 | 98 | 0.00184 |
|
| chlorobenzene |
| 0.1 | 0.077 | > 99 | 0.0013 |
|
| chloropicrin |
| - | 0.015 | 99 | 0.00023 |
|
|
| 0.07 | 0.110 | 98 | 0.00174 | |
|
| dibromochloropropane(DBCP) |
| 0.0002 | 0.052 | > 99 | 0.000023 |
|
|
| 0.6 | 0.080 | > 99 | 0.0013 | |
|
|
| 0.075 | 0.040 | > 98 | 0.0013 | |
|
|
| 0.005 | 0.088 | 955 | 0.00485 | |
|
|
| 0.007 | 0.083 | > 99 | 0.0013 | |
|
|
| 0.07 | 0.170 | > 99 | 0.00053 | |
|
|
| 0.1 | 0.086 | > 99 | 0.0013 | |
|
|
| 0.005 | 0.080 | > 99 | 0.0013 | |
|
|
| - | 0.079 | > 99 | 0.0013 | |
|
| dinoseb |
| 0.007 | 0.170 | 99 | 0.00024 |
|
| endrin |
| 0.002 | 0.053 | 99 | 0.000594 |
|
| ethylbenzene |
| 0.7 | 0.088 | > 99 | 0.0013 |
|
| ethylene dilbromide (EDB) |
| 0.00005 | 0.044 | > 99 | 0.000023 |
|
| haloacetonitriles (HAN) |
|
|
|
|
|
|
| bromochloroacetonitrile |
| - | 0.022 | 98 | 0.00053 |
|
| dibromoacetonitrile |
| - | 0.024 | 98 | 0.00063 |
|
| dichloroacetonitrile |
| - | 0.0096 | 98 | 0.00023 |
|
| trichloroacetoritrile |
| - | 0.015 | 98 | 0.00033 |
|
| haloketones (HK): |
|
|
|
|
|
|
|
| - | 0.0072 | 99 | 0.00013 | |
|
|
| - | 0.0082 | 96 | 0.00033 | |
|
| heptachlor |
| 0.0004 | 0.08 | > 99 | 0.0004 |
|
| heptachlor epoxide |
| 0.0002 | 0.01076 | 98 | 0.00026 |
|
| hexachlorobutadiene |
| - | 0.044 | > 98 | 0.0013 |
|
| hexachlorocyclopentadiene |
| 0.05 | 0.060 | > 99 | 0.0000023 |
|
| lindane |
| 0.0002 | 0.055 | > 99 | 0.000013 |
|
| methoxychlor |
| 0.04 | 0.050 | > 99 | 0.00013 |
|
| pentachlorophenol |
| 0.001 | 0.096 | > 99 | 0.0013 |
|
| simazine |
| 0.004 | 0.120 | > 97 | 0.0043 |
|
| styrene |
| 0.1 | 0.150 | > 99 | 0.00053 |
|
|
| - | 0.081 | > 99 | 0.0013 | |
|
| tetrachloroethylene |
| 0.005 | 0.081 | > 99 | 0.0013 |
|
| toluene |
| 1 | 0.078 | > 99 | 0.0013 |
|
|
| 0.05 | 0.270 | 99 | 0.00164 | |
|
| tribromoacetic acid |
| - | 0.042 | > 98 | 0.0013 |
|
|
| 0.07 | 0.160 | > 99 | 0.00053 | |
|
|
| 0.2 | 0.084 | 95 | 0.00464 | |
|
|
| 0.005 | 0.150 | > 99 | 0.00053 | |
|
| trichloroethylene |
| 0.005 | 0.180 | > 99 | 0.00103 |
|
| trihalomethanes (includes): |
|
|
|
| |
|
| chloroform (surrogate chemical) |
|
|
|
|
|
|
| bromoform |
|
|
|
|
|
|
| bromodichloromethane |
| 0.080 | 0.300 | 95 | 0.015 |
|
| chlorodibromomethane |
| ||||
|
|
|
|
|
|
| |
|
| xylenes (total) |
| 10 | 0.070 | > 99 | 0.0013 |
|
|
|
|
|
|
| |
|
| 1. These harmonized values were agreed upon by representatives of USEPA and Health Canada for the purpose of evaluating |
| ||||
|
| products to the requirements of this Standard. |
|
|
| ||
|
| 2. Influent challenge levels are average influent concentrations determined in surrogate qualification testing. |
| ||||
|
| 3. Maximum product water level was not observed but was set at the detection limit of the analysis. |
|
| |||
|
| 4. Maximum product water level is set at a value determined in surrogate qualification testing. |
|
| |||
|
| 5. Chemical reduction percent and maximum product water level calculated at chloroform 95% breakthrough point as |
| ||||
|
| determined in surrogate qualification testing. |
|
|
| ||
|
| 6. The surrogate test results for heptachlor epoxide demonstrated a 98% reduction. These data were used to calculate an upper |
| ||||
|
| occurrence concentration which would produce a maximum product water level at the MCL. |
|
| |||
| Woongjin Coway.,Ltd. |
|
|
|
| ||
27 | 658, |
|
|
| |||
Tel.: |
|
|
|
|