Assembling the alkaline ionized water extraction pipe
1.Assemble the alkaline ionized water extraction pipe by turning it clockwise.
Connecting the feed water inlet and adapter
1.Install a 5/16 inch adapter and connect the 5/16 inch tubing.
When a 1/4 inch adapter is already installed for the existing water filtration system, be sure to replace the adapter with a 5/16 inch adapter.
2.Connect the feed water inlet tubing to the elbow fitting of the main body.
Assembling the weak acid ionized water extraction/ draining hose with the main body..
1.Cut the connecting part of the weak acid ionized water extraction / draining hose by approximately 2 cm, and connect it to the bracket acid water connector.
Take care not to assemble the pipe incorrectly: Refer to the marks and the outside diameter of the connector.
Connecting the weak acid ionized water faucet and the hose..
1.Cut the connecting part of the weak acid ionized water extraction / draining hose by approximately 2 cm, and connect it to the weak acid ionized water faucet.
(Draining hose: Striped hose / Acid ionized water hose: Hose with larger outside diameter)
Take care not to assemble improperly : Refer to the marks and the outside diameter of the connector.
Fixing the weak acid ionized water faucet..
1.Fix the weak acid ionized water faucet to an appropriate position such as the front or the side of the sink, with a sucker.
How to Use LL INSTA ATION
32
