Connection | CP TECHNOLOGIES CP-A300N, CP-A220N instruction

1.

2.

Command Control via the Network

Command Control via the Network

When the projector connects network, the projector can be controlled with RS- 232C commands from the computer with web browser.

For details of RS-232C commands, refer to RS-232C Communication / Network command table (&17).

Connection

Turn off the projector and the computer.

Connect the projector's LAN port and the computer's LAN port with a LAN cable. Use the cable that fulfi lls the specifi cation shown in fi gure (Use CAT-5

or greater LAN Cable when LAN ports are used )

3. Turn the computer on, and after the computer has started up turn the projector on.

LAN cable (CAT-5 or greater)

		LAN				LAN

11

Image 11

CP TECHNOLOGIES CP-A300N, CP-A220N manual Connection, Command Control via the Network

Contents

CP-A220N/CP-A300N Example of computer signal Initial set signals Computer IN1, B Computer IN2, C Monitor OUT Connection to the ports Video CEC SCLSDA USB Type a To input component video signal to Computer in ports RS-232C Communication Connection CRC Communicaion settings Response code / Error code h shows hexadecimal Command Control via the Network Port1 Port Communicaion Port TCP #9715 Command format Command control settings Automatic Connection Break Authentication Network Bridge Communication Operating Guide Communication settings RS-232C Communication / Network command table Gamma Gain B Color TempGain R Gain G Tint Offset BColor Temp Offset B Color Execute PhaseAuto Adjust Size Frame Lock Hdmi RangeComputer IN1 Computer IN2 Auto ECO Perfect Monitor OUT ECO ModeVolume Mirror Type a Volume HdmiVolume LAN Volume USB Language MIC VolumeHdmi Audio MIC Level Menu Position MenuPosition H Menu Position H Display Power onAuto Power Template MY BUTTON-2 MY BUTTON-1 High MY SourceRemote Freq Normal Avmt ? PJLink command Lamp ?