![](/images/new-backgrounds/1168604/16860419x1.webp)
CRADLEPOINT MBR1400 USER MANUAL Firmware ver. 3.2.2
∙Green = Powered on.
∙No Light = Not receiving power. Check that the unit is connected to an outlet.
∙Amber = Attention. Check router status page.
Active Ethernet Port Connections –
∙Blue = Connected to an active 10/100 Ethernet interface.
∙Blinking Blue = Traffic.
∙No Light = Not connected, the connection is not configured correctly, the router is not configured correctly, or the router may not be turned on.
WPS: WiFi Protected Setup. When you press the WPS button for five seconds, it allows you to use WPS for your WiFi security.
∙Blinking Blue = WPS setting is in progress.
∙Solid Blue = WPS is active.
Wireless Broadcast: Indicates activity on the WiFi broadcast for the 2.4 GHz band.
∙Blue = 2.4 GHz WiFi is on and operating normally.
∙Red = Error with 2.4 GHz connection.
∙No Light = WiFi is off.
Cable, DSL, or Satellite Modem – WAN: Indicates information about a data source connected to the WAN Ethernet port (blue port).
∙Blue = Connected to an active 10/100 Ethernet interface.
∙Blinking Blue = Traffic.
∙No Light = Not connected, the connection is not configured correctly, or the switch or router are not configured correctly or turned on.
© 2011 CRADLEPOINT, INC. | PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES | PAGE 8 |