![](/images/new-backgrounds/1168604/16860437x1.webp)
CRADLEPOINT MBR1400 USER MANUAL Firmware ver. 3.2.2
3.3.3Your MBR95 router gets an IP conflict when you plug it into your Cable or DSL modem.
∙If your Cable or DSL modem is not working with the router, check that there is not an IP conflict. Go to Internet →
Connection Manager and find the Ethernet connection under WAN Interfaces. If it says ―IPconflict‖ you will need to change the IP address of the MBR95 router from ―192.168.0.1‖. A suggested IP address is ―192.168.10.1‖.
∙Change the IP address by going to Network Settings→ WiFi / Local Network. Find the IP address under ―LAN Settings‖ and type the alternate IP address. Click Apply to save the settings.
NOTE: To access the router administration pages after changing the IP address you will need to go to the new IP address in your internet browser instead of ―http://192.168.0.1‖. You may continue to use ―cp/‖ to access the router administration pages after this change.
If you are still unable to access the internet after following the above directions, contact CradlePoint Technical Support for further assistance.
© 2011 CRADLEPOINT, INC. | PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES | PAGE 17 |