CRADLEPOINT MBR95 USER MANUAL Firmware ver. 3.2.4
7.1.2Failure Check (Advanced Mode Only)
If this is enabled, the router will check that the highest priority active WAN interface can get to the internet even if the WAN connection is not actively being used. If the interface goes down, the router will switch to the next highest priority interface available. If this is not selected, the router will still failover to the next highest priority interface but only after the user has attempted to get out to the internet and failed.
Idle Check Interval: The amount of time between each check. (Default: 30 seconds. Range:
ICMP Ping Check and Ping IP Address: Enable and configure an IP address that the router will use to check if the WAN connection is available. For best results, select an established public IP address.
For example, you might ping Google Public DNS at 8.8.8.8 or Level 3 Communications at 4.2.2.2.
© 2011 CRADLEPOINT, INC. | PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES | PAGE 79 |
