Rosewill RC216 user manual For An Existing Installation

SATA II/ATA 133 PCIe Card RC216 User Manual

make this floppy disk, copy the contents of the “RC-216\Floppy32” folder, found on the driver CD, onto a blank floppy disk then follow the directions below.

1.Setup the RAID Array prior to Windows installation.

2.Follow Microsoft’s Windows installation procedure.

3.Restart the computer when prompted by Windows’ installation.

4.At the Windows Setup screen, press Load Driver to install the RAID driver.

5.Insert the floppy disk, please select JMicron JMB36X Controller (A:\jraid_f.inf), then press Next. (Change A:\ to match your floppy drive letter)

6.Follow the on-screen instructions to complete the Windows installation.

For An Existing Installation

1.Setup the RAID Array prior to driver installation and boot up to Windows.

2.At the Found New Hardware Wizard window pop-up, please click Cancel button to cancel the driver installation for the device at this moment. The driver for this device will be installed in the next step.

3.Please insert the CD driver bound with PCIe SATA II 300 + PATA Raid Card into your CD-ROM Drive.

4.At the Windows desktop, click Start, then Run.

15