Rosewill RC216 user manual RAID 0 Striping, RAID 1 Mirroring

SATA II/ATA 133 PCIe Card RC216 User Manual

RAID 0+1	Disk Striping
	+ Mirroring
JBOD	Disk Concatenation

4

2 or 3 or 4

RAID 0 (Striping)

1.As the BIOS boots press Ctrl+J when prompted to enter the RAID BIOS.

2.At the next screen select Create RAID Disk Drive, press Enter.

3.Enter RAID name, press Enter.

4.Please use arrow keys ↑ and ↓to switch the RAID level to 0-Stripe, then press Enter.

5.Please use arrow keys ↑ and ↓to switch the disk, use the “space” key to mark the selected disk, then press Enter.

6.Please use arrow keys ↑ and ↓ to select chunk size from 4K, 8K, 16K, 32K, 64K or 128K, then press Enter.

7.Input the RAID size, press Enter.

8.When asked Created RAID on the select HDD (Y/N)?, press Y to accept.

9.At the next screen select Save And Exit Setup, press Enter. When asked Save to disk &Exit (Y/N)?, press Y to exit the BIOS.

RAID 1 (Mirroring)

1.As the BIOS boots press Ctrl+J when prompted to enter the RAID

6