SATA II/ATA 133 PCIe Card RC216 User Manual
10
start the computer.
2. During boot press Ctrl+J to enter the RAID BIOS.
3. Select Rebuild Mirror Drive press Enter.
4. Please use arrow keys ↑and ↓to select the array you want to
rebuild, press Enter.
5. Please use arrow keys ↑and ↓to select the destination disk,
press Enter.
6. When rebuilding is finished, select Save And Exit Setup, press
Enter. When asked Save to disk &Exit (Y/N)?, press Y to exit the
BIOS.
The PCIe SATA II 300 + PATA Raid Card BIOS will appear every time your
system starts up. During this (POST) process, the BIOS will show up and
indicate the devices attached to it.
For Windows® 2000, XP and Server 2003
For New Installation
A new installation requires a floppy disk for the driver installation. To
make this floppy disk, copy the contents of the “RC-216\Floppy32”
folder, found on the driver CD, onto a blank floppy disk then follow the