FREQUENCY

MAINTENANCE REQUIRED

REFER TO

EVERY10HOURS

CLEANAND RE-OILAIRFILTER

PAGE 13

EVERY25HOURSTHEREAFTER

CHECKOIL

PAGE 13

L%/ERY25HOURS

CHECKSPARKPLUGPOSIT1ONGAP

PAGE 4

EVERY2SHOURS

ROCKERARMCLEARANCEADJUSTMENT

PAGE 16

Perform these required maintenance procedures at the frequency stated in the table. These procedures should also be a part of any seasonal tune-up.

NOTE: Failure to maintain your trimmer at the recom- mended schedule may result in poor performance and/or cause permanent damage to your trimmer

NOTE: Some maintenance procedures may require special tools or skills. If you are unsure about these procedures call 1-800-235-5878 for assistance.

NOTE: Maintenance, replacement, or repair of the emission control devices and system may be performed by any non-road engine repair establishment, individual or authorized service dealer.

Oil Fill Plug/Dipstick_._._

Add

CHECKING THE OIL LEVEL

The importance of checking and maintaining the proper oil level in the crankcase cannot be overemphasized. Check oil before each use:

1.Stop the engine and allow to cool.

2.Place the unit on a fiat, level surface to get a proper oil level reading.

3.Keep dirt, grass clippings and other debris out of the engine. Clean the area around the oil fill plug/dipstick before removing it.

4.Remove the oil fill plug/dipstick and wipe offoil. Rein- sert it all the way back in.

S. Remove the oil fill plug/dipstick and check the oil level. Oil should be between the add and fill marks (Fig. 16).

6.If the level is low, add a small amount ofoil to the oil fill hole (Fig.17) and recheck. Repeat this procedure until the oil level reaches the full mark of the dipstick.

NOTE: Do not overfill the unit.

NOTE: Make sure the O-Ring is in place on the oil fill plug/ dipstick when checking and changing the oil (Fig. 16).

Fig. 16

WARNING:

When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

J

WARNING:

To prevent extensive engine wear and damage to the unit, always maintain the proper oil level in the crankcase. Never operate the unit with the level below the bottom of the dipstick.

Oil Fill Plug!

Dipstick

/

Oil Fill Hole

Fig. 17

12

Page 11 Page 13
Page 12
Image 12
Craftsman 104.79211, 104.79212 warranty Checking the OIL Level
Page 11 Page 13

104.79212, 104.79211 specifications

The Craftsman 104.79211 and 104.79212 are two notable products in the Craftsman tool lineup, designed to meet the needs of both professional tradespeople and DIY enthusiasts. These models reflect Craftsman's commitment to quality, durability, and innovative technology in their tool manufacturing.

One of the main features of the Craftsman 104.79211 is its robust construction. Made from high-grade materials, this model is built to withstand rigorous use without compromising performance. The design includes an ergonomic handle, ensuring users can maintain comfort during prolonged use, which reduces fatigue and enhances productivity. This feature makes it particularly useful for tasks that require precision and extended focus.

The Craftsman 104.79212 follows suit with similar durability features while incorporating advanced technology that elevates its functionality. This model boasts an integrated measurement system, allowing users to achieve greater accuracy in their work. The easy-to-read scale helps avoid miscalculations and ensures a professional finish every time.

Both models come equipped with a quick-release mechanism, which allows for easy adjustment and interchangeability of attachments. This is particularly beneficial for users who require versatile tools for various applications. The ability to switch between different attachments on the fly saves time and increases efficiency on the job site.

Another standout feature of these models is their compatibility with the Craftsman tool ecosystem. Users can easily integrate them into their existing tool collection, enhancing the overall versatility of their toolkit. This seamless compatibility means that tradespeople can count on dependable performance across multiple projects.

In terms of safety, both the 104.79211 and 104.79212 models incorporate safety features designed to protect users during operation. This gives peace of mind while working on different tasks.

Overall, the Craftsman 104.79211 and 104.79212 embody a perfect blend of reliability, user-friendly design, and advanced features. Whether you are a seasoned professional or a novice, these tools provide exceptional performance for a wide range of tasks, reinforcing Craftsman's reputation as a leader in the tool industry. With their focus on innovation and user comfort, these models are a worthwhile addition for anyone looking to enhance their tool collection.
Top Page Image Contents