ARBOR LOCK - Allows the user to keep the blade from rotating while tightening or loosening the arbor locking bolt during blade replacement or removal.

BASE - Supports the table, holds accessories and allows for workbench or leg set mounting.

BEVEL LOCKING HANDLE - Locks the miter saw at a desired bevel angle.

BEVEL SCALE - To measure the bevel angle of the saw blade 0° to 45° left.

COVER PLATE SCREW - Loosen this screw and rotate the plate for access to the blade arbor locking bolt.

FENCE - Helps to keep the workpiece from moving when sawing. Scaled to assist with accurate cutting.

LOWER BLADE GUARD - Helps protect your hands from the blade in the raised position. It retracts as the blade is lowered

MITER HANDLE - Used to rotate the saw to the right or left cutting position.

MITER SCALE - To measure the miter angle 0° to 45° left, 0° to 45° right.

MOUNTING HOLES - Used to mount the miter saw to a stable surface=

ON/OFF TRIGGER SWITCH -To start the tool, squeeze the trigger. Release the trigger to stop the miter saw.

POSITIVE STOP LOCKING LEVER - Used in combination with the miter handle, it Pocksthe miter saw at a preset positive stop for the desired miter angle.

STOP LATCH - Locks the miter saw in the lowered position for compact storage and transportation.

SWITCH HANDLE - The switch handle contains the trigger switch. The blade is lowered into the workpiece by pushing down on the handle. The saw will return to its upright position when the handle is released.

WARNING LABELS - Read and understand for your own safety. Always make certain these are in place and legible.

WRENCH STORAGE - Convenient storage to prevent

misplacing the blade wrench.

WOODWORKING TERMS

ARBOR - The shaft on which a blade is mounted.

BEVEL CUT -An angle cut made through the face of

the workpiece.

COMPOUND CUT - A simultaneous bevel and miter cut.

CROSSCUT - A cut made across the width or grain of

the workpiece.

FREEHAND- Performing a out without using a fence (guide), hold down or other proper device to prevent the workpiece from twisting during the cutting operation.

GUM -Asticky sap from wood products.

HEEL - Misalignment of the blade.

KERF - The amount of material removed by blade cut.

MITER CUT - An angle cut made across the width or grain of the workpiece.

RESIN - A sticky sap that has hardened.

REVOLUTIONS PER MINUTE (RPM) - The number of turns completed by a spinning object in one minute.

SAW BLADE PATH - The area of the workpiece or table top directly in line with the travel of the blade or the part of the workpiece that will be cut.

SET - The distance between two saw blade tips, bent outward in opposite directions to each other. The farther apart the tips are, the greater the set.

WORKPIECE - The item being cut. The surfaces of a workpiece are commonly referred to as faces, ends and edges.

9

Page 8 Page 10
Page 9
Image 9
Craftsman 137.21237 operating instructions Woodworking Terms
Page 8 Page 10

137.21237 specifications

The Craftsman 137.21237 table saw is a versatile and robust woodworking tool that caters to both amateur and professional woodworkers. Renowned for its reliability and precision, this table saw has made a mark in the DIY community and among seasoned craftspeople alike.

One of the standout features of the Craftsman 137.21237 is its powerful motor. With a 15-amp motor, it provides ample power to tackle a variety of cutting tasks. This motor facilitates smooth cuts through hardwoods and thick materials, ensuring that users experience consistent performance without lag. The saw comes equipped with a 10-inch blade that spins at impressive RPMs, allowing for clean, efficient cuts across different types of wood and plywood.

Another key characteristic of this table saw is its durable construction. The table surface is made of cast iron, providing a stable base that minimizes vibrations during operation. This stability is crucial for achieving accuracy in cuts, especially for intricate projects that require precise measurements. The table itself measures a generous size, allowing for larger workpieces to be cut with ease.

The Craftsman 137.21237 also boasts an advanced rip fence system. The fence is designed for quick adjustments, enabling users to make straight, consistent cuts at various widths. The easy locking mechanism ensures that your settings remain in place while cutting, enhancing safety and accuracy.

Safety is a paramount concern with the Craftsman 137.21237. It features an integrated blade guard, which provides protection against accidental contact with the blade. Additionally, the saw includes riving knife technology, which helps prevent kickback by keeping the wood aligned during cuts. This safety technology is crucial for woodworkers looking to minimize risk while operating powerful equipment.

Portability is another important aspect of the Craftsman 137.21237. Despite its sturdy build, the saw is designed with user convenience in mind. It includes onboard storage for accessories and additional parts, as well as a foldable stand, making it easy to transport and store when not in use.

In summary, the Craftsman 137.21237 table saw combines power, durability, and precision. With its strong 15-amp motor, robust cast iron construction, advanced safety features, and user-friendly design, it stands out as a reliable choice for anyone engaged in woodworking projects. Whether you're building furniture, crafting cabinetry, or undertaking home improvement tasks, this table saw provides the functionality and performance that can enhance your woodworking experience.
Top Page Image Contents