BLADE REMOVAL AND

INSTALLATION

PIN-END BLADE REMOVAL AND INSTALLATION

! WARNING

To prevent personal injury, always turn the saw OFF and disconnect the plug from source before changing blades or making adjustments.

Pin-end type blades are thicker for stability and for faster assembly. These blades are used whenever faster cutting on a variety of materials and 3/4 in. thickness or greater are required. Use whenever less precision or thicker kerf cutting is acceptable.

NOTE: When installing pin-end blades, the set screws located on the upper and lower blade holders should not be over or under tightened. The slot must be slightly wider than the thickness of the blade. After the blade is installed, the blade tension mechanism will keep the pin-end in place.

PIN-END BLADE REMOVAL (FIG. G, H)

1.Loosen the tension on the blade by turning the tension knob counterclockwise. (Fig. G).

Fig. G

2.Remove the blade (2) from the upper (3) and lower (4) blade holder by pulling blade forward to release, and lift the blade through the access hole. (Fig. H)

NOTE:

●Apply slight downward pressure on the upper arm when removing the blade from the upper blade holder.

●If the tension is still too tight to remove blade, turn the tension lever (Fig. G) counterclockwise no more than one rotation. (Do not over-loosen.)

Fig. H

3 2

2 4

19

Page 18 Page 20
Page 19
Image 19
Craftsman 137.21602 operating instructions PIN-END Blade Removal FIG. G, H, Fig. G
Page 18 Page 20

137.21602 specifications

The Craftsman 137.21602 is a versatile and powerful bench drill press designed for both hobbyist and professional applications. Renowned for its durability and precision, this machine is an ideal addition to any workshop where drilling accuracy and efficiency are paramount.

One of the standout features of the Craftsman 137.21602 is its powerful 3/4 HP motor, which delivers consistent torque for a wide range of drilling tasks. This reliable motor enables users to work with various materials including wood, metal, and plastic, making it a multi-functional tool suited for both light and heavy-duty jobs.

The drill press boasts a 5-speed mechanism that allows users to select optimal speeds ranging from 620 to 3100 RPM. This versatility ensures that users can adjust the speed to match the specific requirements of the material being drilled and the size of the bit being used. The easy-to-use lever and simple pulley system facilitate quick speed changes, making it user-friendly.

Another significant characteristic of the Craftsman 137.21602 is its robust and durable construction. The solid cast iron base provides excellent stability and reduces vibration during operation, which enhances accuracy and extends the lifespan of the tool. The adjustable table, with its generous surface area and ability to tilt, offers additional support and adaptability for different drilling angles and heights.

The drill press features a laser guide system that provides enhanced precision, allowing users to line up their work accurately. This laser alignment system helps ensure that every hole drilled is precisely where the user intends, reducing the likelihood of errors and waste of materials. For added convenience, the quick-release chuck allows for fast and easy bit changes without the need for additional tools.

Safety is also a priority in the design of the Craftsman 137.21602. It includes a built-in safety switch to prevent accidental starts and a sturdy emergency stop feature, allowing users to quickly shut down the machine if needed.

In summary, the Craftsman 137.21602 is a well-rounded drill press that combines power, precision, and user-friendly features. With its adjustable speeds, durable construction, precision laser guide, and safety mechanisms, it offers a reliable solution for anyone looking to enhance their drilling capabilities, making it an excellent choice for both DIY enthusiasts and professionals alike.
Top Page Image Contents