1.ALWAYSUSESAWBLADEGUARD,splitterand anti-kickbackpawlsforeveryoperationforwhich theycanbeused,includingthrough-sawing. Through-sawingoperationsarethoseinwhichthe bladecutscompletelythroughtheworkpiecewhen rippingorcross-cutting.

2.ALWAYSHOLDWORKFIRMLYagainstthemiter gaugeorripfence.

3.USE A PUSH STICK when required. Always use a

push stick when ripping narrow stock. Refer to ripping instructions in this Operator's Manual where the push stick is covered in detail. A pattern for making your own push stick is included on page 28.

4.NEVER PERFORM ANY OPERATION "FREE HAND", which means using only your hands to support or guide the workpiece. Always use either the fence or the miter gauge to position and guide the work.

[A DANGER]

FREEHAND CUTTING iS THE MAJOR CAUSE OF KICK-BACK & FINGER/HAND AMPUTATIONS.

5.NEVER STAND or have any part of your body in line with the path of the saw blade. Keep your hands out of the saw blade path.

6.NEVER REACH behind or over the cutting tool for any reason.

7.NEVER use a rip fence when cross cutting.

8.DO NOT USE a molding head with this saw.

9.FEED WORK iNTO THE BLADE against the direction of rotation only.

10.NEVER use the rip fence as a cut-off gauge when cross-cutting.

11.NEVER ATTEMPT TO FREE A STALLED SAW BLADE without first turning the saw OFF. Turn power switch OFF and disconnect the plug from the power source immediately to prevent motor damage & before removing material.

12.PROVIDE ADEQUATE SUPPORT to the rear and the sides of the saw table for long or wide workpieces.

13.AVOID KICKBACKS (work thrown back towards you) by keeping the blade sharp, the rip fence parallel to the saw blade and by keeping the splitter, anti-kickback pawls and guards in place and

functioningDonotreleaseworkbeforeithas.

passeda!lthewaypastthesawbladeandisoffthe

table.Donotripworkthatistwisted,warpedor doesnothaveastraightedgetoguideitalongthe fence.

14.AVOIDAWKWARDOPERATIONSandhand

positionswhereasuddenslipcouldcauseyour handto moveintothesawblade.

15.NEVER USE SOLVENTS to clean plastic parts.

Solvents could possibly dissolve or otherwise damage the material. Only a soft damp cloth should be used to clean plastic parts.

16.MOUNT your table saw on a bench or stand before performing any cutting operations. Refer to ASSEMBLY AND ADJUSTMENTS on page 10.

17.NEVER CUT METALS or materials which may make hazardous dust.

18.ALWAYS USE tN WELL-VENTILATED AREA. Remove sawdust frequently. Clean out sawdust from the interior of the saw to prevent a potential fire hazard. Attach a vacuum to the dust port for additiona! sawdust removal.

19.NEVER LEAVE THE SAW running unattended. Do not leave the saw unti! it comes to a complete stop.

20.FOR proper operation fotlow the instructions in this Operator's Manual. Failure to provide sawdust fag through and removal hole win allow sawdust to build up in the motor area resulting in a fire hazard and potentia! motor damage (see page 11 for details).

21.DO NOT AUTHORIZE ADDITIONAL USERS to operate this power tool without the accompanying

operators manual for which the user must read and understand.

22.THE REAR OF THE TABLE INSERT MUST BE FLUSH TO THE TABLE during all sawing operations. A rubber adjusting spacer is provided under the rear of the insert for this purpose.

23.DO NOT USE A DADO BLADE LARGER THAN 6 inches in diameter and Y2inch in width. Only

use a stackable dado blade. Do not use adjustable or wobble dadoes.

24.NEVER PERFORM A CUTTING OPERATION USING BOTH the rip fence and the miter gauge at the same time. This may cause kickback and serious injury to the operator.

Page 3 Page 5
Page 4
Image 4
Craftsman 137.24884 operating instructions
Page 3 Page 5

137.24884 specifications

The Craftsman 137.24884 is a reliable and robust table saw that is ideal for both amateur woodworkers and seasoned professionals. This versatile piece of equipment combines performance, durability, and user-friendly features to cater to a variety of woodworking projects, making it a popular choice in workshops.

One of the most notable features of the Craftsman 137.24884 is its powerful 15-amp motor, which delivers ample cutting power to handle hardwoods, softwoods, and various other materials. The table saw boasts a 10-inch blade that allows for precision cuts and can easily handle rip cuts, crosscuts, and bevel cuts. With a maximum rip capacity of 30 inches, users can tackle larger workpieces with ease, enhancing productivity.

The saw's stability is further complemented by its sturdy cast iron table, which provides a flat and smooth surface for accurate cuts. This enhances the overall performance by minimizing vibrations during operation, ensuring that cuts remain true and consistent. Additionally, the adjustable fence system locks securely in place, allowing users to make precise adjustments and achieve repeatable results.

Safety is a key consideration in the design of the Craftsman 137.24884. It comes equipped with a blade guard and anti-kickback pawls, providing an added layer of protection for users. A push stick is also included, promoting safe operation when handling smaller workpieces.

In terms of portability, the saw features a lightweight design complemented by wheels that facilitate easy movement around the workshop or job site. This portability does not compromise its overall strength and stability, which are crucial for accurate table sawing.

Moreover, the Craftsman 137.24884 incorporates easy-to-access controls, allowing users to quickly change blades or adjust settings. Its onboard storage system keeps essential accessories organized and within reach, enhancing the overall user experience.

In summary, the Craftsman 137.24884 table saw combines powerful performance, precision engineering, and essential safety features, making it an excellent investment for anyone interested in woodworking. This model's durable construction and user-friendly design set it apart as a reliable tool that can tackle both small and large projects effectively. Whether constructing furniture or handling renovations, the Craftsman 137.24884 is a solid choice for precision cut woodworking.
Top Page Image Contents