CUTTINGOPERATIONS Therearetwobasictypesofcuts:rippingand crosscuttingRippingiscuttingalongthelengthandthe. grainoftheworkpieceCrosscuttingiscuttingeither. acrossthewidthoracrossthegrainoftheworkpiece. Neitherrippingnorcrosscuttingmaybedonesafely freehandRippingrequirestheuseoftheripfence,and. crosscuttingrequiresthemitergauge.Neverusethe twocut thesametime.

IA WARNING

Before using the saw each and every time, check the following:

1.Blade is tight on the arbor.

2.Bevel angle lock knob is tight.

3.if ripping, fence knob is tight and fence is paraIM to the miter gauge grooves.

4.Blade guard is in place and working properly.

5.Safety glasses are being worn.

The failure to adhere to these common safety rules, and those printed in the front of this manual, can greatly increase the likelihood of injury.

RiPPiNG (FIG. ,CA, BB)

la,WARNING

® Never use the miter gauge when ripping.

e Never use more than one rip fence during a single cut.

eKeep both hands away from the blade and path of the blade.

®The workpiece must have a straight edge against

the fence and must not be warped, twisted, or bowed.

eDo not allow familiarity or frequent use of your table saw to cause careless mistakes. Remember that even a careless fraction of a second is enough to cause a severe injury.

5.Slowly feed the workpiece into the blade by pushing forward only on the workpiece section (1) that will pass between the blade and the fence. (Fig. AA)

[,&WARNING]

AVOID KICKBACK by pushing forward on the section of the workpiece that will pass between the blade and the fence. Use a push stick at all times.

Fig. AA

[,& WARNING ]

Always use a push stick. When width or rip narrower than 2 in. the push stick cannot be used because the guard will interfere.=. Use the auxiliary fence as shown are page 20.

6.Keep your thumbs off the table top. When your hand reaches the front edge of the table (2), finish the cut with a push stick (3) (Fig. BB). You can make a push stick using the pattern on page 2&

7.The push stick (3) should always be used during all ripping operations. (Fig. BB)

8.Continue pushing the workpiece with the push

stick (3) until it passes the blade guard and clears the rear of the table.

[A& DANGER]

Never attemptto pulltheworkpiece backwards

during a cutting operation. This will cause kickback and serious injury to the user can occur. When the blade completely stops raise the anti-kickback pawls on each side of the splitter

1.Remove the miter gauge. Secure the rip fence to the table at the desired rip measurement.

2.Raise the blade so it is about 1/8 in. higher than the top of the workpiece.

3.Place the workpiece fiat on the table and against the fence so the larger portion of the workpiece is between the blade and the fence. Keep the workpiece about 1 in. away from the blade.

4.Turn the saw ON and wait for the blade to come up to speed.

and slide the workpiece out.

Fig. BB

3

2

18

Page 17 Page 19
Page 18
Image 18
Craftsman 137.24884 operating instructions La,WARNING
Page 17 Page 19

137.24884 specifications

The Craftsman 137.24884 is a reliable and robust table saw that is ideal for both amateur woodworkers and seasoned professionals. This versatile piece of equipment combines performance, durability, and user-friendly features to cater to a variety of woodworking projects, making it a popular choice in workshops.

One of the most notable features of the Craftsman 137.24884 is its powerful 15-amp motor, which delivers ample cutting power to handle hardwoods, softwoods, and various other materials. The table saw boasts a 10-inch blade that allows for precision cuts and can easily handle rip cuts, crosscuts, and bevel cuts. With a maximum rip capacity of 30 inches, users can tackle larger workpieces with ease, enhancing productivity.

The saw's stability is further complemented by its sturdy cast iron table, which provides a flat and smooth surface for accurate cuts. This enhances the overall performance by minimizing vibrations during operation, ensuring that cuts remain true and consistent. Additionally, the adjustable fence system locks securely in place, allowing users to make precise adjustments and achieve repeatable results.

Safety is a key consideration in the design of the Craftsman 137.24884. It comes equipped with a blade guard and anti-kickback pawls, providing an added layer of protection for users. A push stick is also included, promoting safe operation when handling smaller workpieces.

In terms of portability, the saw features a lightweight design complemented by wheels that facilitate easy movement around the workshop or job site. This portability does not compromise its overall strength and stability, which are crucial for accurate table sawing.

Moreover, the Craftsman 137.24884 incorporates easy-to-access controls, allowing users to quickly change blades or adjust settings. Its onboard storage system keeps essential accessories organized and within reach, enhancing the overall user experience.

In summary, the Craftsman 137.24884 table saw combines powerful performance, precision engineering, and essential safety features, making it an excellent investment for anyone interested in woodworking. This model's durable construction and user-friendly design set it apart as a reliable tool that can tackle both small and large projects effectively. Whether constructing furniture or handling renovations, the Craftsman 137.24884 is a solid choice for precision cut woodworking.
Top Page Image Contents