REVELRiPPiNG Thiscutisthesameasrippingexceptthebladebevel

angleis set to an angle other than "0".

la,WARNINGn

Cut only with the workpiece and the fence on the right aide of the blade.

RiPPiNG SMALL PIECES

IA wAR.I.Gn

Avoid injury from the blade contact. Never make through saw cuts narrower than 1/2 in. wide.

1.it is unsafe to rip small pieces, instead, rip a larger piece to obtain the size of the desired piece.

2.When a small width is to be ripped, your hand cannot be safely put between the blade and the rip fence, therefore, use one or more push sticks to pass the workpiece completely through and past the blade.

CROSSCUTTING 90 ° MITER ANGLE (FIG. CO)

IA wAR.I.Gn

To prevent serious injury:

®Do not allow familiarity or frequent use of your table saw to cause careless mistakes. Remember that even a careless fraction of a second is

enough to cause a severe injury.

eKeep both hands away from the blade and the path of the blade.

1.Remove the rip fence and place the miter gauge in one miter gauge groove of the table.

2.Adjust the blade height so it is 1/8 in. higher than the top of the workpiece.

3.Hold the workpiece firmly against the miter gauge with the blade path in line with the desired cut location. Keep the workpiece away from the blade.

4.Start the saw and wait for the blade (1) to come up to fullspeed.

5.Keep the workpiece (2) against the face of the miter gauge (3) and flat against the face of the gauge and fiat against the table. Then slowly push the workpiece through the blade. (Fig. CC)

6.Do not try to pull the workpiece back with the blade turning. Turn the switch OFF, and carefully slide the workpiece out when the blade is completely stopped.

IAwAR.I.GI

Always position the larger surface of the workpiece on the table when crosscutting and/or bevet crosscutting to avoid unstabHity.

USING WOOD FACING ON THE MITER GAUGE (Fig. RD)

Slots are provided in the miter gauge for attaching an auxiliary facing (1) to make it easier to cut very long or short pieces. Select a suitable piece of smooth wood, drill two holes through it and attach it the miter gauge face with screws. Make sure the facing does not interfere with the proper operation of the sawblade guard. When cutting long workpieces, you can make a simple support by clamping a piece of plywood to a sawhorse.

Fig. DD

-- 1

BEVEL CROSSCUTTING (FIG. EE) 00~45 ° BLADE BEVEL & 90° MITER ANGLE

This cutting operation is the same as crosscutting except the blade is at bevel angle other than 0%

[_ WARNmNG ]

Always work to the right side of the blade during

this type of cut. The miter gauge must be in the right side groove because the beveJ angle may cause the blade guard to interfere with the cut if used on the left side groove.

1.Adjust the blade (1) to the desired angle, and tighten the blade bevel lock knob.

2.Tighten miter lock handle (3) at 90°.

3.Hold workpiece (2) firmly against the face of the miter gauge throughout the cutting operation.

Fig. EE

19

Page 18 Page 20
Page 19
Image 19
Craftsman 137.24884 operating instructions IAwAR.I.GI, REVELRiPPiNG Thiscutisthesameasrippingexceptthebladebevel
Page 18 Page 20

137.24884 specifications

The Craftsman 137.24884 is a reliable and robust table saw that is ideal for both amateur woodworkers and seasoned professionals. This versatile piece of equipment combines performance, durability, and user-friendly features to cater to a variety of woodworking projects, making it a popular choice in workshops.

One of the most notable features of the Craftsman 137.24884 is its powerful 15-amp motor, which delivers ample cutting power to handle hardwoods, softwoods, and various other materials. The table saw boasts a 10-inch blade that allows for precision cuts and can easily handle rip cuts, crosscuts, and bevel cuts. With a maximum rip capacity of 30 inches, users can tackle larger workpieces with ease, enhancing productivity.

The saw's stability is further complemented by its sturdy cast iron table, which provides a flat and smooth surface for accurate cuts. This enhances the overall performance by minimizing vibrations during operation, ensuring that cuts remain true and consistent. Additionally, the adjustable fence system locks securely in place, allowing users to make precise adjustments and achieve repeatable results.

Safety is a key consideration in the design of the Craftsman 137.24884. It comes equipped with a blade guard and anti-kickback pawls, providing an added layer of protection for users. A push stick is also included, promoting safe operation when handling smaller workpieces.

In terms of portability, the saw features a lightweight design complemented by wheels that facilitate easy movement around the workshop or job site. This portability does not compromise its overall strength and stability, which are crucial for accurate table sawing.

Moreover, the Craftsman 137.24884 incorporates easy-to-access controls, allowing users to quickly change blades or adjust settings. Its onboard storage system keeps essential accessories organized and within reach, enhancing the overall user experience.

In summary, the Craftsman 137.24884 table saw combines powerful performance, precision engineering, and essential safety features, making it an excellent investment for anyone interested in woodworking. This model's durable construction and user-friendly design set it apart as a reliable tool that can tackle both small and large projects effectively. Whether constructing furniture or handling renovations, the Craftsman 137.24884 is a solid choice for precision cut woodworking.
Top Page Image Contents