Sony SCH-735 Connecting a Monitor, Connecting Power, High Voltage Type (AC230V, 50Hz), For AC / DC power

COLOR CCD CAMERA User Guide

Connect the Video OUT port on the rear panel of the camera to a monitor.

•Makesuretoturnoffthedevicetobeconnectedbeforemakinganyconnections.

•Turnthe75Ω/Hi-Z switches of interim display devices to the Hi-Z position, and the

switches of any final device to the 75Ω position.

•Sincetheconnectionproceduremaydifferdependingonthetypeofmonitoror

peripheral device to be connected, refer to the User Manual for the device to be

connected.

CCD Camera

Intermediate End monitor

Monitor

• When Using a C Mount Lens

1. Remove the protective glass cover at the front

of this product and turn the C-Mount Adapter

clockwise to install it.

2. Turn the C-Mount lens clockwise to install it.

3. Set focus of camera using Back Focus Control Lever of camera side after

combining C-Mount lens.

Installation Procedures

Connecting a MonitorConnecting Power

Since power specifications differ depending on the model, make sure to check your

model name and specifications before connecting power. You can connect power as

shown in the following figure.

For AC / DC powerHigh Voltage Type (AC230V, 50Hz)

•Sincethepowerspecificationsupports

both AC and DC, connect AC 24V,

500mA Adaptor or DC 12V, 500mA

Adaptor.

•UseAC230V,50HzpowersourceFor

SHC-735PH.