Accessories, For Sectional Doors On12 | Craftsman 139.53664SRT2

Accessories

Sears offers many useful accessories for your garage door opener. They ere illustrated below with Sears model numbers and descriptions.

i139.53702

Emergency Key Release:			139.53681	SECURITY+ 3-Function Remote
				Control:
Requiredfor a garage with NO
				Includes visor clip.
access	door. Enables	homeowner

to open garage door manually from
outside	by disengaging	trolley.

139.53703

139.53804

139.53680

Outdoor Key Switch:

i Operates the garage door automatically from outside when remote control is not handy.

139.53684

8 Foot Rail Extension

To allow an 8 foot door to open fully.

SECURITY+ Compact

3-Function Remote Control:

With loop for attaching key ring.

Enables homeowner to operate garage

door opener from outside by entering a password.Also can add a temporary

password for visitorsor service persons. This temporary password can be limitedto a programmable number of hours or entries.

139.53805	10 Foot Rail Extension:		139.53686		Plug-In Light Control:
	To allow a 10 foot door to open fully.				Enables homeowner to turn on a
					lamp, television or other appliance

					from car, bedside, or anywhere in
					the home with a remote,
53589	Support Brackets:		139.53709		Door Clearance Brackets:
					(For Sectional		Doors On12)
	i For finished ceilings or where
					Replaces top brackets and rollers on
	additional support is required,
					door to reduce height of door travel.
	based on garage construction.
					For use when installing opener in
	Includes brackets and fastening
					garage with low headroom			clearance.
	hardware.
		To Add the Keyless Entry
We recommend	that you program your password		If you do not have			a Premium	Control	Console:
before you install the		Keyless Entry. You will not	1.	Choose	a 4-digit	password	using numbers from
need assistance,	and you can test the reception at			0 to 9 (a number can be used more than once, for
the mounting location		before installation.		example, 4, 0, 4, 1).
If you have a Premium		Control Console:	2.	Press the four buttons for the password, then
1. With the door closed, press the four digit password				press and ho/dthe Enter button. The indicator light

	desired, then press and hold Enter.		on the door opener panel will blink.
			3. Press and release the SRT (learn) button on the
2.	Press and hold the light button on the door control.
			opener panel. After the opener light flashes,
3.	Press and hold	the door control push bar.
			release the Enter button.

4.	After the opener	light flashes, release all buttons.	Test by pressing the password, then press Enter. The

door should begin to move.