Craftsman 139.53978SRT owner manual IIIIIII11111111LLLIIIIIlI, Nut

Please read and comply with the warnings and reinforcement Instructions on page 24. They apply to one-piece doors also.

Header Wall

2x4 Support Header

Ooor

BracketPlacement

of Door

Bracket

VediCal

Garage Door

--Finished Coiling --

Horizontal and vertical reinforcement is

•needed for lightweight garage doors lass, alumk_um, steel, door with

glass panel, stc,). (Not Provided)

		Nut	i	e
					5,116"
		5/16"-18	O	I
			I	t	Top	of Door
	Door		_	i	(Inside	Garage)
					/
	Bracket
				i!	_.	of Door
						Top Edge
					--	Optiona_
						Placement
			€	I
					Carriage	Bolt
exposed	framing	or for			5!16"-18X2-1f2"
the optional installation,			i
For a door with no
use 5/16"x1-1/2"		lag
screws	(not provided)

•Center the bracket on the top of the door, in line with the h,eader bracket as shown. Mark holes.

•Drill 5/16" pilot holes and fasten the door bracket with hardware provided.

If the door has no exposed framing, drill 3/16" pilot holes and fasten the bracket with 5/16"xl -1/2" lag screws (not provided) to the top of the door.

The door bracket may be installed on the top edge of the door if required for your installation. (Refer to the dotted line optional placement drawing.) Drill 3/16" pilot holes and substitute 5/16"x1-1/2" lag screws (not provided) to fasten the bracket to the door.

Hardware Shown Actual Size

© ©

Nut 5/16" - 18 LockWasher 5/16"

IIIIIII11111111LLLIIIIIlI

Carriage Bolt

5/16"-18 x 2-1/2"

25