|
| You can attach the header bracket either to the |
Install the Header Bracket |
| wall above the garage door, or to the ceiling. |
I | Follow the instructions which will work best for | |
Installation Step 2 | your particular requirements. | |
|
| |
Wall Header | Bracket Installation |
•Center the bracket on the vertical guideline with the bottom edge of the bracket on the horizontal line as shown (with the arrow pointing toward the ceiling).
•Mark the vertical set of bracket holes. Drill 3/16" pilot holes and fasten the bracket securely to a structural support with the hardware provided.
| 2x4 |
| |
| Structural |
| |
Header | Support | Wall Mount | |
Bracket | Vertical | ||
| |||
| Center |
| |
| Line |
|
Spdng
_s
OptionaZ
Mounting Holes
Vertical
Une
Highest Point of
Garage Door Travel
Hardware Shown Actual Size
Lag Screw
Ceiling Header Bracket Installation
•Extend the vertical guideline onto the ceiling as shown.
•Center the bracket on the vertical mark, no more than 6" from the wall. Make sure the arrow is pointing toward the wall. The bracket can be
mounted flush against the ceiling when clearance is minimal.
•Mark the side holes, Drill 3/16" pilot holes and fasten bracket securely to a structural support with the hardware provided.
Ceiling | 6" Maximum |
Mounting Holes |
Vertical
Center Line
Door Spring
Vertical
Center Une
14