Craftsman 152.213351 operating instructions Support Tube Assembly, INTAKE Funnel Assembly

Fig. 8

CD

\

\

C

2, insert a 5/16-18 x 5/8" hex head screw (C) through the exhaust flange, exhaust flange gasket and the exhaust port flange, See figure 8,

8, Thread 5/16-18 flange hex nut (D) onto the 5/16=18 x 5/8" hex head screw, do not tighten completely, See figure 8,

4, Repeat Steps 1,2, and 3 for the remaining hobs, Tighten all hardware,

SUPPORT TUBE ASSEMBLY

MAKE CERTAIN THE DUST COLLECTOR IS DISCONNECTED FROM THE POWER SOURCE.

Fig. 10

2, insert the lower support tube (C) into the lower support tube holder and tighten support tube clamp, See figure 10,

3, Place support tube clamp over top of lower support tube,

iNTAKE FUNNEL ASSEMBLY

MAKE CERTAIN THE DUST COLLECTOR IS DISCONNECTED FROM THE POWER SOURCE.

AA

1, Place support tube clamp (A) over lower support tube holder (B), See figure 9,

\

B

1, Align the two hobs in the intake support brace (A) with the two hobs in the intake funnel (B),

See figure 11,

11