Razor v.1_09-11 Before yOU BEgIN, ASSEmBly Instructions, Required Tools, Double Collar Clamp

BEFORE yOU BEgIN

Remove contents from box. Inspect the contents of the box for scratches in the paint and/or dents that may have occurred during shipping. Because your scooter was partially assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.

Grips

T-tube/ Steering column

Handlebar

Down tube

Collar clamp

Rear fender/brake

Fork headset locknut

Front fork Deck

Wheels and wheel bearings

qRequired Tools

5mm

Allen wrench

aSSEmBly INSTRUCTIONS

qDouble Collar Clamp

1 Loosen the collar clamp and	2 With the front wheel pointed
slide it upward. With a clock-wise	straight ahead, the handlebars
twisting motion, push and “thread”	square to the front wheel and the
the T-tube onto the fork until it	Razor logo facing the front, tighten
bottoms out on the fork headset	the clamp as shown. Tighten each
lock nut.	bolt securely.

WaRNINg: DO NOT USE NON-RAZOR PRODUCTS WITH YOUR SCOOTER.

Razor scooters have been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket products may or may not be compatible and will void your warranty.

WaRNINg: Failure to properly install and tighten the collar clamp may cause the rider to lose control and fall. If you do not understand these instructions or the concept of “tighten securely” seek the assistance of a qualified mechanic.

Need Help? Visit our website for replacement parts and product support at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.

2