Razor v.1_09-11 owner manual CHECk Before RIDINg, Triple Collar Clamp on select models only

aSSEmBly INSTRUCTIONS

qTriple Collar Clamp (on select models only)

1 Loosen the collar clamp and slide it upward. With a clock-wise twisting motion, push and “thread” the T-tube onto the fork until it bottoms out on the fork headset lock nut.

2 With the front wheel pointed straight ahead, the handlebars square to the front wheel and the Razor logo facing the front, tighten the clamp as shown. Tighten each bolt securely.

qQuad Collar Clamp (on select models only)

1 Loosen the collar clamp and slide it upward. With a clock-wise twisting motion, push and “thread” the T-tube onto the fork until it bottoms out on the fork headset lock nut.

2 With the front wheel pointed straight ahead, the handlebars square to the front wheel and the Razor logo facing the front, tighten the clamp as shown. Tighten each bolt securely.

CHECk BEFORE RIDINg

qDouble Collar Clamp

Using a 5mm Allen wrench, check that the collar clamp bolta are tightened securely.

3