134 | Eclipse - Fujitsu Ten CD5444 guide

If you have a question:

Displayed information (for troubleshooting)

The information listed in the chart below is displayed to show the status of the CD, Memory Stick player and CD changer. Refer to the chart for the appropriate action.

Information Contents	Explanation and remedial action to take

INFO 2 NO DISC LOADED IN	There is no disc in the magazine or player. Load a
THE MAGAZINE	disc in the magazine. (Load a music disc.)

INFO 3 DISCS ARE DIRTY OR	The loaded disc is dirty or upside down. Check it
DAMAGED	for proper orientation and verify it is clean.

INFO 5 CD PLAYER AND CD	•The CD player and CD changer is inoperative for
CHANGER FAILS	some reason. Go through the magazine removal
MECHANICALLY	procedure.
	•If a magazine fails to eject, have your dealer fix
	problem.

INFO 6 WHEN THE CD	•The temperature in the CD changer is too high for
CHANGER INTERNAL	operation. Wait till it cools down.
TEMPERATURE IS	•Resume playing after the “High temperature
HIGH (TO PROTECT	sensed and CD stopped" display disappears. If
PICKUP UNIT)	the CD still cannot play, have your dealer repair it.

INFO 7 AN INTERNAL POWER	•Turn the ACC off once before turning it on once
SUPPLY FAILURE IS	again to resume the operation.
OCCURRING WITH	•If the function still cannot be restricted, contact
THE AUTO CHANGER	your dealer.

LOAD	CD changer is in the process of verifying the
	presence of CDs after a magazine has been
	inserted into the CD changer.

134

Image 134

Eclipse - Fujitsu Ten CD5444 owner manual Displayed information for troubleshooting, 134

Contents

Model CD5444 For your safety in using CD5444 Page Page Page Page Table of Contents How to operate the CD player How to operate the Sound Adjustment Mode 116 How to operate the receiver with an optional Operating precautions About compact discs About CD accessories About brand new CDs About irregularly-shaped CDs How to remove CDsAbout borrowed CDs About Memory Sticks Memory Stick About cleaning the Memory Sticks With the front open Names of controls and partsFront view Memory Stick security See About ESNKey CD security See ACC security See Hold both for the more than two seconds Check that the Power is OFFPress and hold button 3, then the Func button, Press the Open button How to operate the ESN Key CD securityHow to program the Key CD Insert the CD into the slot How to cancel the Key CD Insert your Key CD into the slot Refer to How to program the Key CD How to change the Key CDHow to resume normal operation ESN security lock out Insert the key CD into the slot What happens if an incorrect CD is inserted?Press Func button Insert the Memory Stick into the slot How to operate the ESN Memory Stick securityHow to record a security code Refer to Ejecting the Memory Stick on Press the Func button for more than one secondEject the Memory Stick How to cancel the Memory Stick security Press the Disc button Refer to How to record a security code on How to change the Memory StickRefer to How to cancel the Memory Stick security on How to resume normal operation ESN security lock out Disc button Func button Recorded data will read form the Memory Stick ESN security operating procedure Func button simultaneously for more than two seconds How to operate the ACC securityOnce a security code has been recorded, press button How to turn the security indicator on/off Hold both for more than one second How to read the Electronic Serial NumberPress and hold button 4, then the Func button, Turning the power on and off Basic operation Insert a CD into the disc slot, label side up Listening to a CDPress the Open button Insert a MG Memory Stick into the Memory Stick slot Press the Disc button to switch to the Memory StickListening to MG Memory Stick Mode Listening to the tuner Adjusting audio volume Turn the Audio Control button to the left or right Bass Mode Switching audio control modesVOL Volume Mode Second to select the item to be adjusted FAD Fader Mode Treb Treble ModeBAL Balance Mode NON-F NON-FADER Mode SVC Source Volume Control Mode Setting examples Press and hold the Audio Control button until Settings againEnabling the loudness control Loud on display appears on the screen Press the Disp button for less than one second Making changes with Display Adjustment ModeTurn the SEL button in either direction to display setting Items for selection Changing illumination Color Contrast adjustmentTurn the SEL button to adjust contrast Turn the SEL button to select Contrast Press the SEL button Function mode is activated Making changes with Function ModeVariety of settings can be changed Press the Func button for less than one second Clock display on/off Disabling the guide tone feature for button operationPress the Func or RTN button to exit function mode This receiver uses the 12-hour display notation Setting the TimeClock adjustment mode is activated Operation assist function Enabling E-COM featureOthers Listening to CDs How to operate the CD playerPress the Disc button to switch to the CD player mode Turn the SEL button to the left or right Fast Forward/RewindPlaying the beginning of tracks Scan Press and hold the Seek or Fast button Press button 5 to repeat the track being played Repeating the same track RepeatPlaying tracks in random order Random Press button 6 to play the tracks in random order Press the button Ejecting the discPress the Open button for less than one second Remove the disc and press the Open button Creating a title for a CD Disc modeDisc title setting mode is activated Press the Func button for less than one second while CD title is now memorized Press the Func or RTN button to exit function modePress the RTN button Changing a previously set title CD title being played at this point will be deleted Deleting a previously created titleHold button 6 down for more than two seconds Title has now been deleted Displaying CD Text Press the Disp button for more than one second Playable MP3 file standards How to operate the MP3 playerWhat is MP3? ID3 tags Media Format of discs Playing MP3 File namesMulti-sessions MP3 playing time display Listening to MP3 file Press button 1 or Skipping to the next or previous folderReturn to the root directory of the CD Playing the beginning of files Scan Repeating the same file Repeat Playing files in random order Random Displaying title How to operate the Memory Stick player Player mode Fast Forward/Rewind Repeating the same track Repeat Ejecting the Memory Stick Eject the Memory Stick Music CD Recording on Memory StickInsert the MG Memory Stick to be recording the track Press the Func button for more than one second Turn the SEL button to select MS. Press the SEL button Turn the SEL button to select REC Mode Press the SEL buttonSelecting tracks to be recorded Turn the SEL button to select ALL or 1 Track Turn the SEL button to select 66kbps, 105kbps or Setting sound qualityREC quality selection mode is activated 132kbps Deleting recorded file Turn the SEL button to select Format Press the SEL button Format mode is activated, then OK message will appearFormatting MG Memory Stick quick format MG memory stick can be formatted How to operate the tuner Tuning to a station Press the SEL button for more than one second until a Beep is heard Turn the SEL button to the right or left to tune to Manually setting stations into memoryPress the FM AM button to switch between FM and AM Station to be entered in memory Press the SEL button for less than one second Preset station scanTo stop the preset scan mode at a desired station, press SEL button again Station name settings can be changed Setting a station nameTuner mode Station name setting mode is activated Press the Func or RTN button to exit function mode Station name has now been deleted Deleting a station nameHold the 6 button down for more than two seconds DX Mode Check that the deck is in standby modeAuto Mode Press and hold the button 1, then FM AM button, Changing the radio band location Press and hold the button 3, then FM AM button, Fading out FM reception characteristicsFM reception differs from AM Reception area of FM broadcasts Multipath ISERV sound effect See Customizations About Sound Adjustment ModePosition selector Graphic equalizer Parametric equalizer How to operate the Sound Adjustment Mode Crossover FcLPF/HPF Time alignment ISERV sound effect customizations Non-fader phaseMulti-harmonizer Mode will change to sound adjustment mode Operations during Normal ModeTurn the SEL button to select a setting item Press the Sound button for less than one second DSP Setting Press the Sound or RTN button to exit sound adjustment mode Turn the SEL button to select the setting item Position selector setting PositionMode will change to position selector setting mode Turn the SEL button to select Position Press the SEL button Reverse Reverse phase Non-fader phase selection NON-FADERMode will change to phase selection mode 100 Operations during Advance ModeNormal music mode Turn the SEL button to select EQ Press the SEL button Equalizer adjustment EQSwitching equalizer modes Press the SEL button for less than one second Turn the SEL button to select the frequency to be adjusted Fine-tuning EQ functionsSelect the equalizer mode When the preset value is changed, the display shows as Selecting an equalizer mode from memoryPreset pattern stored in memory will be retrieved ~5 Preset ch No Changed Making fine adjustments to the parametric equalizerMode will change to parametric equalizer adjustment mode 104 105 Turn the SEL button to select a setting item Simplified time alignment settings T-ALIGNMode will change to time alignment setting mode Turn the SEL button to select T-ALIGN Press the SEL button 107 Position selector setting PositionOther time alignment items can be set at this time Turn the SEL button to select CAR Type Press the SEL button Mode will change to car type selection modeSelecting the type of vehicle CAR Type 108 Installed 109 Tweeter settings TweeterMode will change to tweeter setting mode Turn the SEL button to select Tweeter Press the SEL button Turn the SEL button to select Rear SP Press the SEL button Mode will change to rear speaker position setting modeRear speaker position selection Rear SP 110 Crossover adjustment X- Over 112 Multi-harmonizer settings HarmonizerMode will change to multi-harmonizer setting mode 113 Data reading mode is activated Reading sound quality data 115 Data How to use the Card remote control Muting the volume Turning the power on/offAdjusting the audio volume Press the PWR button Press the Mode button Switching playback modesHow to play the tuner Selecting the FM/AM band Switching disc modes How to play CDsSelecting preset stations Selecting a station manually or automatically Press the Trackaps button. button Skips to the next track Enabling the optional E-COM featureSkipping to the next or previous disc Replacing the battery Left or right To cut the volume or restore it instantly 122Press the Audio Control button, and turn it to Each press will switch tuner modes from FM1 FM2 FM3 AM 123 Band button Tuneseek buttons Illuminating the NOB remote control Press the Track button Remove the back cover of the remote control unit by 126 How to use an optional NOB remote control Press the Disc button Seek button Fast forward Fast button Rewind 128 Playing the beginning of tracks Scan Random play is not canceled even if a magazine is ejected Skipping to the next or previous CD Specifying a CD to play Turn on the portable audio player and start its play Switch to AUX mode by pressing the Disc button forOthers Function If you have a question Displayed information for troubleshooting 134 135 Incompatible Files Has Been Inserted Mode Problem Causes Remedial action Refer To take 136 137 Specifications Components Before installationInstallation angle Qty Mounting instruction Mounting the main unit Install the bezel on the main unit 141 Names of lead wires and destinations refer to 142 System 143 CD5444 Receiver, used alone 144 CD5444 + CH3083 + Power Amplifier 145 CD5444 + CH3083 + CH3083 + Power Amplifier CD5444 + 2301 + CH3083 + Power Amplifier 147 South Vermont AVENUE, TORRANCE, CA 90502 Phone 310 Phone Taiwan 150 151 Customer Notice Serial No