Eclipse - Fujitsu Ten CD5444 owner manual How to operate the ACC security

ESN security operating procedure

Button [5]

[FUNC] button

How to operate the ACC security

ACC security involves using Memory Stick security to record a security code, and then when the ignition switch is turned to OFF and back to ACC, the operation of all buttons is disabled.

1	Check that the Power is OFF.
2	Once a security code has been recorded, press button

[5] and the [FUNC] button simultaneously for more than two seconds.

The ACC security function will be activated. Press button [5] and the [FUNC] button simultaneously for two seconds or more again to cancel the ACC security function.

•If the vehicle's battery is disconnected at times such as during

ATTENTION servicing, ACC security will be canceled.

•When ignition switch is turned OFF and back to ACC, the operation of all buttons is disabled. If this happens, resume normal operation. (Refer to "How to resume normal operation (ESN security lock out)" on page 31.)

35