Eclipse - Fujitsu Ten CD5444 owner manual How to change the Memory Stick

ESN security operating procedure

4Insert the Memory Stick and close the front panel. The recorded data will be read from the Memory Stick.

5If the contents recorded in the Memory Stick match the information recorded by the deck, [CANCEL] will appear on the display.

The security function will be canceled and the deck will return to normal operation.

•If a reading error occurs or if an incorrect Memory Stick is

ATTENTION inserted, [ERR] will appear on the display for two seconds, and then the display will change to [EJECT]. If this happens, eject

the Memory Stick and check it.

•Security setting cannot be canceled by this procedure if the Memory Stick containing the security code is formatted.

6Eject the Memory Stick.

Refer to "Ejecting the Memory Stick" on page 72.

How to change the Memory Stick

You can change the Memory Stick and security code that have been recorded by the deck to a different Memory Stick and security code.

1Cancel the security code that has been recorded with the deck.

Refer to "How to cancel the Memory Stick security" on page 28.

2Re-record the new Memory Stick and security code that you would like to use.

Refer to " How to record a security code" on page 26.

30