Eclipse - Fujitsu Ten CD5444 owner manual Listening to the tuner

Basic operation

Buttons [1] to [6] [SEEK ] button

[FM AM] button [FAST ] button [SEL] button

Listening to the tuner

1	Press the [FM AM] button.
	This will turn the tuner on.
2	Press the [FM AM] button to switch to the desired FM or
	AM bands.

Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed.

3	Turn the [SEL] button to the left or right to tune to a
	station.

Turn to the right: Tunes to higher frequencies.

Turn to the left: Tunes to lower frequencies.

4 Press the [SEEK /FAST ] button to start the automatic station search.

[SEEK ] button: Starts searching toward higher frequencies.

[FAST ] button: Starts searching toward lower frequencies.

If stations have been stored in memory, pressing a button ATTENTION from [1] to [6] will directly select a station. (Refer to the section

“Manually setting stations into memory” on page 80)

41