SERVICE
/_ WARNING: Preventive maintenance performed by unauthorized I
personnel may result in misplacing of internal wires and components, I
which could cause a serious hazard.
1.Tool service MUST BE performed only bya Sears Service Center.
Service or maintenance performed by unqualified personnel could result
in a risk of injury.
IMPORTANT NOTE: All service that requires opening the saw should only be
performed at a Sears Service Center.
2. When servicing a tool, ALWAYS use onlyidentical replacement parts. Follow
instructions in the Maintenance Section ofthis manual. Use of unauthorized
parts or failure to follow Maintenance Instructions may create a risk of electric
shock or injury.
TOOL LUBRICATION
YourCRAFTSMAN Reciprocating Saw has been properly lubricated
and is ready to use.
1. In two to six months, depending on use, take your tool to the nearest Sears
Service Center for a complete cleaning, inspection and lubrication.
2.Tools used constantly on productionjobs will need lubrication more often.
3.Tools that haven't been used forlong periods oftime should
be lubricated before you usethem.
WHEN SERVICING, USE ONLY IDENTICAL REPLACEMENT PARTS
I/_ WARNING: To avoid accidents, ALWAYS disconnect the I
I
tool from the power source BEFORE cleaning or performing any I
maintenance.
1. Only the partsshown on pages 14-16 are intended to be repaired or
replaced by the customer. All other parts represent an important part ofthe
double insulation system and should onlyserviced at aSears Service Center.
12