Failure to follow all instructions listed below may result in electric J Z_ WARNING: BE SURE to read and understand all instructions.
shock, fire and/or serious personal injury.
WORK AREA SAFETY
1.ALWAYS keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.DO NOT operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.ALWAYS keep bystanders, children, and visitors away while operating power tool. Distractions can cause you to lose control.
[I
a
ELECTRICAL SAFETY
1.Double insulated tools are equipped with a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet.
Do not change the plug in any way,
2.Double insulation [] eliminates the need for the three wire grounded power
cord and grounded power supply system. Applicable only to Class II (double insulated) tools.
3.Before plugging in the tool, BE SURE that the outlet voltage supplied is
within the voltage marked on the tool'sdata plate. DO NOT use =AC only" rated tools with a DC power supply.
4.ALWAYS avoid body contact with grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.
5.If operating the power tool in damp locations is unavoidable,
ALWAYS use a Ground Fault Circuit Interrupter to supply power to your tool. ALWAYS wear electrician's rubber gloves and footwear in damp conditions.
6.DO NOT expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
7.DO NOT abuse the cord. NEVER use the cord to carry the tools or pull the plug from the outlet. Keep cord away from heat, oil, sharp edges or
moving parts. Replace damaged cords immediately. Damaged cords
• increase the risk of electric shock.
3
