Craftsman 315.10849 owner manual Rpm, Cutting Depth at 0 Bevel Cut Ram, Operate this

Horsepower		2-1/4	Cutting	Depth at 45 ° Bevel Cut	1-13/16 in. (46	ram)
Input	12 Amperes		Cutting	Depth at 51.5 ° Bevel Cut	1-5/8 in. (41	ram)
Blade Diameter	7-1/4 in. (184	mm)	Rating		120 volts, 60 Hz, AC
Blade Arbor	5/8 in. (16	mm)	No Load Speed		5,000	RPM
Cutting Depth at 0 ° Bevel Cut	2-3/8 in. (60	ram)

Your circular saw has been shipped completely	,_	WARNING:	If any parts		are missing, do not
assembled except for the blade. Inspect it carefully to
		operate this	tool	until the	missing parts are
make sure no breakage or damage has occurred		replaced. Failure		to do so could result in possible
during shipping. If any parts are damaged or missing,
		serious personal		injury.
contact your nearest Sears Retail Store to obtain

replacement parts before attempting to operate saw. A blade, blade wrench, and this owner's manual are also included.

The following

7-1/4 in.

7-1/4 in.

7-1/4 in.

7-1/4 in.

7-1/4 in.

7-1/4 in.

7-1/4 in.

recommended accessories are currently available at Sears Retail Stores.

40 Tooth General Purpose Cut-Off Blade

35 Tooth Master Combination Blade

200 Tooth Plywood Blade

18 Tooth Carbide Blade

18 Tooth Mach II Silver Series Carbide Blade

24 Tooth Mach II Silver Series Carbide Blade

24 Tooth Combination Carbide Blade

Rip Guide

WARNING" The use of attachments or accessories not listed might be hazardous.