SWITCH
See Figure 2.
To turn your screwdriverON, depress switchtrigger in
the direction of the arrow in figure 2. Toturn it OFF,
release the switchtrigger.
TRIGGER Fig, 2
TWO SPEED SWITCH
See Figure 3.
Your screwdriverhas been designed fortwo speed
driving.A slide switchis located ontop of your
screwdriver to select either HI or LO speed. When
using screwdriverin the HI speed setting, speed will
increase and unit will have less power and torque.
When using screwdriver inthe LO speed setting,
speed will decrease and unitwill have more power
and torque. Use HI speed forfast screwdriving
applicationsand LO speed for high power and torque
applications.
TWO SPEED (HI-LO SWITCH)
HIGH
LOW
Fig. 3
SWITCH LOCK
See Figure 4.
The switch triggercan be locked in the OFF position.
This feature can be used to prevent the possibilityof
accidental startingwhen not in use. Tolock switch
trigger, place the forward/reverse switch in center
position.
FORWARD (F)
REVERSE (R)
SWITCH
REVERSE (R)
FORWARD
WARNING: Battery toots are atways in
operating condition.Therefore, switchshould
always be lockedwhen not in use or carrying at
your side.
REVERSIBLE
See Figure 4.
Your screwdriver is equipped with a Forward/Reverse
Switch which allows you to change the directionof
rotationof the bit. For drivingor forward rotation,slide
(F) position,To reverse the
bitdirection, slide the switch to the reverse (R)
position.
CAUTION: Toprevent gear damage, always
allow bitto come to a complete stop before
changing the direction of bit rotation.
Tostop your screwdriver, release switchtrigger and
arrowyour screwdriverto come to a complete stop.
_1= WARNING: Always wear safety gegg_esor
safety glasses with side shields when operating
tools. Failure to doso could resultin objects
being thrown intoyour eyes, resultingin possible
serious injury.
8