Craftsman 315.11401 manual Know Your NAILER/STAPLER, LOCK-OFF Button, Switch

SPECIFICATIONS
Motor		19 2VoltDC
Switch		Lock-OffSwitch
StapleSpeed		30shots/ min
Staple Size		1/2" crown width, 1/4" to 9/16"	length
Brad Size		18 gauge, 5/8"	length
Magazine Capacity		84 staple/brad
Charger	Input	120 V. 60 Hz, AC only
Charge	Rate		1 Hour

KNOW YOUR NAILER/STAPLER

See Figure 1.

Before attempting to use this tool, familiarize yourself with all operating features and safety requirements.

_IL WARNING: Do not allow familiarity with this tool to

make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

LOCK-OFF BUTTON

This toot is equipped with a "lock-off" button which reduces the possibility of accidental starting. The lock-off button is located on the handle above the switch trigger. You must depress the lock-off button in order to pull the switch trigger. The lock resets each time the trigger is released. Note: You can depress the lock-off button from either the left or right side.

SWITCH

To turn tool ON, depress the lock-off button and pull switch trigger. Release switch trigger to turn toot OFF.

,_ WARNING: If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to

do so could result in possible serious personal injury.

7