Craftsman 315.11461 operating instructions Symbol Name DESIGNATION/EXPLANATION

Important:Someofthefollowingsymbolsmaybeusedonyourtool.PleasestudythemandlearntheirmeaningProper. interpretationof thesesymbolswillallowyoutooperatethetoolbetterandsafer.

SYMBOL	NAME		DESIGNATION/EXPLANATION
V	Volts		Voltage
A	Amperes		Current
Hz	Hertz		Frequency		(cycles per second)
min	Minutes		Time
	Alternating Current		Type	or a characteristic			of current
	Direct	Current	Type	or a characteristic			of current
no	No Load Speed		Rotational speed, at no load
.../min	Revolutions or Reciprocation Per Minute		Revolutions,		strokes,
			surface speed, orbits etc. per minute
,_	Safety	Alert Symbol	It means attention!!! Your safety is
			Indicates danger, warning orcaution.
			involved.
O	Wear	Eye Protection	safety glasses			with side shields when
			Always wear safety goggles or
			operating this			product.
	Wet Conditions Alert		Do not expose			to rain or use in damp
			locations.

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

Symbol Meaning

,_DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING:

Indicates

a potentially

hazardous

situation

which,

if not avoided,

could result in death or

serious injury.

CAUTION:

Indicates

a potentially

hazardous

situation

which,

if not avoided,

may result in minor or

moderate

injury. It may also be used to alert against

unsafe practices that may cause property damage.

NOTE:

Advises

you of information or instructions vital

to the

operation

or maintenance

of the equipment.

6