Craftsman 315.11461 Batteries, Battery Pack Removal and Preparation for Recycling

_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other

part may create a hazard or cause product damage.

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

,_ WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils,

etc. come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.

BATTERIES

Your drill'sbattery pack is equipped with nickel-cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing,

The batteries in this toot have been designed to provide maximum trouble free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.

To obtain the longest possible battery life, we suggest the following:

Do not abuse power tools. Abusive practices can damage toot as well as workpiece.

Only the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer. All other parts should be replaced at a Sears Service Center.

_ WARNING: Do not attempt to modify this toot or create accessories not recommended for use with

this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

•Store and charge your batteries in a cool area. Temperatures above or below normal room temperature will shorten battery life.

•Never store batteries in a discharged condition. Recharge them immediately after they are discharged.

•All batteries gradually lose their charge. The higher the temperature the quicker they lose their charge. If you store your tool for long periods of time without using it, recharge the batteries every month or two. This practice will prolong battery life.

To preserve natural resources, please recycle or dispose of batteries properly.

This product contains nickel-cadmium batteries. Local, state or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash.

Consult your local waste authority for information regarding available recycling and/or disposal options.

BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING

_1= WARNING: Upon removal, cover the battery pack's terminals with heavy duty adhesive tape. Do not

attempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

The following recommended accessories are currently available at Sears Retail Stores.

•	6-Pc. Extra Length Magnite Power	Bit Set	•	17-Pc. Power Screwdriver/Nutddver Set and Case
•	30-Pc. Power Screwdriver/Nutddver	Set and Case	•	High Speed Bits (For Wood or Metal)..3/4 in. Max.

_l_k WARNING: The use of attachments or accessories not listed might be hazardous.

15