
SWITCH
See Figure 2.
To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger.
FORWARD/REVERSE
SELECTOR
VARIABLESPEED |
|
SWITCHTRIGGER | Fig. 2 |
VARIABLE SPEED |
|
This toot has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger depression.
Note: You might hear a whistling or ringing noise from the switch during use. Do not be concerned, this is a normal
part of the switch function.
TWO-SPEED GEAR TRAIN
See Figure 3.
Your drill has a
TWO SPEEDLO
GEARTRAIN(HI-LO) SPEED
SPEED
Fig. 3
TO INSTALL BATTERY PACK
•Lock switch trigger on your drill by placing the direction of rotation selector in center position. See Figure 5.
•Place battery pack in your drill. Align raised rib on battery pack with groove inside drill. See Figure 4.
BATTERY
LATCHES
_DEPRESSLATCHESTO
RELEASEBATTERYPACK | Fig. 4 |
•Make sure the latches on each side of your battery pack snap in place and battery pack is secured in drill before beginning operation.
_ | CAUTION: When | placing battery pack in your drill, |
| be sure raised rib on battery pack aligns with groove | |
| inside drill and latches snap into place properly. | |
| Improper assembly of battery pack can cause | |
| damage to internal | components. |
TO REMOVE BATTERY PACK
•Lock switch trigger on your drill by placing the direction of rotation selector in center position. See Figure 5.
•Locate latches on side of battery pack and depress to release battery pack from your drill. See Figure 4.
•Remove battery pack from your drill.
10