Size | of | Sanding | Disc | 6 inches | Rating | 120 volts, 60 Hz, AC only, 4.5 amps. |
Size | of | Polishing | Sonnet | 6 inches | Spindle Size | 1/2 inch 20 TPI |
Horsepower |
| 1/2 | No Load Speed | 1,400/min. & 1650/min. | ||
WARNING: Always wear safety goggles or safety glasses with side shields when operating your sandedpolisher. Failure to do so could result
in dust, shavings, loose particles or foreign objects being thrown into your eyes, causing possible serious injury.
KNOW YOUR SANDER/POLISHER
Your sandedpolisher is suitable for sandingwith
coarse, medium, and fine grit sanding discs. When
used with the polishing bonnet supplied, it can also be used as a bufferor polisher.
Before attempting to use any tool, familiarize yourself with all operating features and safety requirements.
TWO SPEED SWITCH
See Figure 1.
Your sander/polisheris equipped with a two speed switchtdgger locatedin the rear handle, To turn ON, depress switchtdgger, to turn OFF, release switch tdgger, For low speed sandingor polishing, depress switchtdgger haffway. For high speed sandingor polishingdepress switchtrigger all the way. Be sum switch trigger is in OFF position before connecting to power supply source.
WARNING: Do not allow familiaritywith your tool to make you careless. Remember that a careless fraction of a second is sufficientto inflict
severe injury.
,_ WARNING: The double insulated system is intended to protect the usar from shock resulting
from a break in the tool's internal wiring. Observe
all normal safety precautions related to avoiding electrical shock,
POUSHING
BONNETSWITCHTRIGGER
SANDINGDISC (NOTINCLUDED)
AUXlUARYHANDLE
Fig. 1
6
