UNPACKING Thisproducthasbeenshippedcompletelyassembled.
•Carefullyremove the too[ and any accessories from the box. Make sure that a_litems listed in the packing mist are inc)uded.
•Inspect the too[ carefullyto make sure no breakageor damage occurred during shipping.
•Do not discard the packing materis[ untilyou have carefullyinspected and satisfactorilyoperated thetool.
•If any parts are damaged or missing, please call
PACKING LIST
Sander
Dust Bag
Paper Punch
Sandpaper (1)
Operator'sManual
_k WARNNG: Do not allow familisrity with tools to make you careless. Rememberthat a careless
fraction of a second is sufficientto inflictserious injury.
_L WARNING: Always wear safety gogglesor safety glasses with side shieldswhen operating power
tools, Failureto do so could rseultin objectsbeing thrown into your eyes resultingin possibleserious injury.
_k WARNING" If any parts are missingdo not operate thLstool untilthe missing parts are repracsd, Failure
to do so could result in possiblessr[ous persosai injury.
_ WARNING: Do not attempt to modify this tool or create accessoriesnot recommended for use
with this tool. Any such atterat(on or modification Ls misuse end could result in e hazardouscondition
feadiog to possibleserious persona[In}ury.
AWARNNG: Do not connect to power supply until assembly is complete, Failureto comply could result
in accidental startingand possibleseriousinjury.
•Wrap sandpaper around cushion.Lift lever on opposite end of sander and insertloose end of sandpaper under
the paper clamp. Fit sandpaper againstcushionas fight as possible.
•Lift up on paperclamplever and lock _ntoplace.
INSTALLING SANDPAPER
The cushionon the sander gives you the option of using either
INSTALLING NON-ADHESIVE SANDPAPER
See Figure2.
• Unplug the sander. |
• inspect sandpaper before installing.Do not use if bro- |
ken or defsc_ve. |
• If rap{acingsandpaper, remove old sandpaper. To |
remove paper, release paper clamp by lifting up on |
lever and disengagingit from the tab on the platen. |
• Insertend ofnew 1/4sheet sandpaper approximately |
(1/2 inch) under the paper clamp. |
CUSHION
NON-ADHESIVE
PAPER
• Lift up on paper clamp (everand lock into p(ace. Apply |
downward pressure to conform sandpaper to p(atan. |
SANDPAPERCLAMP Fig. 2
LEVER
