• | Table of Contents | 2 | |||
• | General | Safety | Rules | ||
• | Specific | Safety | RulesAnd/Or | Symbols | |
• | Features | .................................................................................................................................................................. |
| ||
• | Assembly |
| 7 | ||
• | Operation |
| |||
• | Maintenance |
| 12 | ||
• | Accessories |
| 13 | ||
• | Exploded ViewAnd Repair | Parts List | 15 | ||
• | Parts Ordering | / Service | 16 | ||
,_ WARNING: Read and follow all instructions.
Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges, or moving pads.
SAVE THESE INSTRUCTIONS
Work Area
•Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
Do not operate power tools in explosive atmo- spheres, such as in the presence of flammable liquids, gases, or dust. Power tools may create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while
operating a power tool. Distractions can cause you to lose control.
Electrical Safety
•Double insulated tools are equipped with a polar- ized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not
change the plug in any way. Double insulation [] eliminates the need for the
Replace damaged cords immediately. Damaged cords increase the risk of electric shock.
When operating a power tool outside, use an outdoor extension cord marked
These cords are rated for outdoor use and reduce the risk of electric shock.
Personal Safety
•Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of inatten- tion while operating power tools may result in serious personal injury.
•Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
•Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on, invites accidents.
Remove adjusting keys or wrenches before turning
Avoid body contact with grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There
is an increased risk of electric shock if your body is grounded.
Don'texpose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.
Use safety equipment. Always wear eye protection.
Dust mask, nonskid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
2
