Craftsman 315.27994 Auxiliary Handle, Wingscrew, Handle To Loosen Torque Adjustment Ring, Groove

TWO SPEED

GEARTRAIN(HI-LO)

AUXILIARY

HANDLE

KEYLESS

CHUCK

TORQUE SWITCH

ADJUSTMENT TRIGGER

RING

SCREWDRIVERBITS_

BIT STORAGEAREA

DIRECTIONOF

ROTATIONSELECTOR (FORWARD/REVERSE)

LOCK-ON

BuIrON

Fig. 1

,_ WARNING: If any parts are missing, do not operate your drill-driver until the missing parts are replaced.

Failure to do so could result in possible serious personal injury.

AUXILIARY HANDLE

See Figure 2.

WINGSCREW

AUXlLIAR_

HANDLE

TO LOOSEN

TORQUE

ADJUSTMENT

RING

OI_TIGHTEN

GROOVE

An auxiliary handle is packed with your drill-driver for ease of operation and to help prevent loss of control. The handle can be rotated 360°.

Note: For convenience and ease of starting threads, the hex nut has been trapped inside the molded slot in the auxiliary handle.

TO INSTALL:

•Unplug your drill-driver.

_1 WARNING: Failure to unplug your drill-driver could result in accidental starting causing serious injury.

•Place ring of handle over the chuck and torque adjustment ring. Note: Notches in handle fits in a groove behind torque adjustment ring.

•Once in position behind torque adjustment ring, rotate handle to desired angle.

•Thread wing screw into handle insert.

•Tighten wing screw securely.

	NOTCHES
360°	RAISEDRIB
ROTATION	Fig. 2

7